Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|
| Mold shrinkage rate | | ASTM D-955 | 5-7 | in/inE-3 |
| Taber wear amount | | ASTM D-1044 | 10 | mg/1000次 |
| Solid specific gravity | | ASTM D-792 | 1.27 | |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Yield flexural strength | | ASTM D-790 | 22000 | psi |
| Yield tensile elongation | | ASTM D-638 | 7.0 | % |
| IZOD notch impact strength | | ASTM D-256 | 0.6 | ft-lb/in |
| Flexural modulus | | ASTM D-790 | 480000 | psi |
| IZOD notch free impact strength | | ASTM D-4812 | 25.0 | ft-lb/in |
| Fracture resistance, tensile elongation | | ASTM D-638 | 60.0 | % |
| Yield tensile strength | | ASTM D-638 | 15200 | psi |
| Rockwell hardness | | ASTM D-785 | 109 | psi |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Hot deformation temperature | 264Psi | ASTM D-648 | 387 | ℉ |
| Hot deformation temperature | 66Psi | ASTM D-648 | 405 | ℉ |
| vicat softening point | | ASTM D-1525 | 426 | ℉ |
| Combustibility | | UL 94 | V-0 | CLASS |
| Heat index | 电性能 | UL746B | 170 | °C |
| Heat index | 机械冲击性能 | UL746B | 170 | °C |
| Heat index | 非机械性能 | UL746B | 170 | °C |
| Coefficient of linear expansion | flow | ASTM E-831 | 3 | E-5/in/in℉ |
| Coefficient of linear expansion | xflow | ASTM E-831 | - | E-5/in/in℉ |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Loss factor | 1KHz | ASTM D-150 | 0.0013 | |
| Dielectric strength | 62mils | ASTM D-149 | 830 | v/mil |
| Dielectric constant | 1KHz | ASTM D-150 | 3.15 | |
| Volume resistivity | | ASTM D-257 | 1×10 | Ω.cm |
| Basic performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Melt index | | ASTM D-1238 | 17.8 | g/10min |
| Water absorption rate | 平衡,73℉ | ASTM D-570 | 1.25 | % |
| Water absorption rate | 24小时，73℉ | ASTM D-570 | 0.250 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices