Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|
| Shrinkage rate | MD | ASTMD955 | 0.20to0.60 | % |
| Water absorption rate | 平衡 | ASTMD570 | 0.30 | % |
| Melt mass flow rate | 200°C/5.0kg | ASTMD1238 | 1.4 | g/10min |
| Melt mass flow rate | 230°C/3.8kg | ASTMD1238 | 6.0 | g/10min |
| density | | ASTMD792 | 1.07 | g/cm³ |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile strength | 屈服 | ASTMD638 | 79.4 | Mpa |
| elongation | 屈服 | ASTMD638 | 4.5 | % |
| Bending modulus | | ASTMD790 | 3520 | Mpa |
| bending strength | 屈服 | ASTMD790 | 108 | Mpa |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Hot deformation temperature | 1.8MPa,未退火 | ASTMD648 | 94.0 | °C |
| Vicat softening temperature | | ASTMD15252 | 109 | °C |
| Impact performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Impact strength of cantilever beam gap | 23°C,3.20mm | ASTMD256 | 15 | J/m |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare