Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|
| Shrinkage rate | 流动 | ASTM D955 | 0.30 | % |
| Shrinkage rate | 横向流动 | ASTM D955 | 0.90 | % |
| Water absorption rate | 24 hr, 23°C, 65%r.h | ASTM D570 | 1.9 | % |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| elongation | 断裂 | ASTM D638 | 3.0 | % |
| Bending modulus | | ASTM D790 | 11400 | Mpa |
| bending strength | | ASTM D790 | 250 | Mpa |
| Tensile strength | | ASTM D638 | 170 | Mpa |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Thermal deformation temperature under load | 1.8 MPa, 未退火 | ASTM D648 | 305 | °C |
| Glass transition temperature | | | 95.0 | °C |
| Linear coefficient of thermal expansion | 流动 | ASTM E831 | 2.2E-5 | cm/cm/°C |
| Linear coefficient of thermal expansion | 横向 | ASTM E831 | 7.3E-5 | cm/cm/°C |
| Melting temperature | | | 320 | °C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Dielectric strength | | ASTM D149 | 24 | KV/mm |
| Dielectric constant | 1 MHz | ASTM D150 | 3.60 | |
| Volume resistivity | | ASTM D257 | 1.0E+15 | ohms·cm |
| Dissipation factor | 1 MHz | ASTM D150 | 0.012 | |
| hardness | Test Condition | Test Method | Test Result | Unit |
|---|
| Rockwell hardness | M 级 | ASTM D785 | 100 | |
| flammability | Test Condition | Test Method | Test Result | Unit |
|---|
| UL flame retardant rating | | UL 94 | V-0 | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices