Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|
| Melt index | 2.16kg@380℃ | g/10min | ASTM D1238 | 16-25 |
| Shrinkage rate | MD | ASTMD955 | 0.60 | % |
| Water absorption rate | 24hr | ASTMD570 | 0.50 | % |
| Water absorption rate | 24小时 | % | ASTM D570 | |
| Melt mass flow rate | 380°C/2.16kg | ASTMD1238 | 30 | g/10min |
| Water absorption rate -30 days | | ASTMD570 | 1.9 | % |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile fracture elongation rate | 23℃ | % | ASTM D638 | |
| Tensile strength | | ASTMD638 | 88.9 | Mpa |
| IZOD notch impact strength | 23℃ | J/m | ASTM D256 | 53.4 |
| Tensile modulus | | ASTMD638 | 2690 | Mpa |
| Tensile modulus | 23℃ | MPa | ASTM D638 | |
| tensile strength | 23℃ | MPa | ASTM D638 | 88.9 |
| elongation | 屈服 | ASTMD638 | 6.5 | % |
| Bending modulus | | ASTMD790 | 2620 | Mpa |
| Bending modulus | 23℃ | MPa | ASTM D790 | |
| bending strength | 23℃ | MPa | ASTM D790 | 114 |
| bending strength | | ASTMD790 | 125 | Mpa |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Hot deformation temperature | 1.8MPa,退火 | ASTMD648 | 200 | °C |
| Hot deformation temperature | 1.82MPa | ℃ | ASTM D648 | 195 |
| Linear coefficient of thermal expansion | MD | ASTMD696 | 5.2E-05 | cm/cm/°C |
| Glass transition temperature | | ℃ | DSC | 223 |
| Coefficient of expansion | | cm/cm/℃ | ASTM D696 | 0.00058 |
| Maximum continuous operating temperature | | ℃ | ASTM D794 | 180 |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Surface resistance | | ohms | ASTM D257 | |
| loss factor | 23℃，60Hz | | ASTM D150 | |
| Insulation strength | | kV/mm | ASTM D149 | |
| Volume resistance | | ohm-cm | ASTM D257 | |
| Dielectric strength | | ASTMD149 | 15 | KV/mm |
| Dissipation factor | 60Hz | ASTMD150 | 1.7E-03 | |
| Dissipation factor | 1kHz | ASTMD150 | 2.2E-03 | |
| Dissipation factor | 1MHz | ASTMD150 | 5.6E-03 | |
| Dielectric constant | 23℃，60Hz | | ASTM D150 | 3.20 |
| Dielectric constant | 60Hz | ASTMD150 | 3.51 | |
| Dielectric constant | 1kHz | ASTMD150 | 3.50 | |
| Dielectric constant | 1MHz | ASTMD150 | 3.54 | |
| Arc resistance | | sec | ASTM D495 | |
| Volume resistivity | | ASTMD257 | 1.7E+15 | ohms·cm |
| Relative track index | | V | ASTM D3638 | 150 |
| Oxygen index | | % | ASTM D2863 | |
| flammability | Test Condition | Test Method | Test Result | Unit |
|---|
| UL flame retardant rating 3 | 0.75mm,ALL | UL94 | V-0 | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices