Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|
| Shrinkage rate | MD | ASTMD955 | 0.90到1.5 | % |
| Melt mass flow rate | 190°C/2.16kg | ASTMD1238 | 11 | g/10min |
| Melt mass flow rate | 200°C/5.0kg | ASTMD1238 | 64 | g/10min |
| elastomer | Test Condition | Test Method | Test Result | Unit |
|---|
| Permanent compression deformation | 23°C,22hr | ASTMD395B | 35 | % |
| Tensile stress 3,4 | 100%应变,23°C | ASTMD412 | 2.55 | Mpa |
| Tensile stress 3,4 | 300%应变,23°C | ASTMD412 | 3.34 | Mpa |
| Tensile strength 3,4 | 断裂,23°C | ASTMD412 | 7.64 | Mpa |
| Elongation rate 3,4 | 断裂,23°C | ASTMD412 | 710 | % |
| Filling analysis | Test Condition | Test Method | Test Result | Unit |
|---|
| Apparent viscosity | 200°C,11200sec^-1 | ASTMD3835 | 20.0 | Pa·s |
| hardness | Test Condition | Test Method | Test Result | Unit |
|---|
| Shore hardness | 邵氏A,10秒 | ASTMD2240 | 65 | |
| flammability | Test Condition | Test Method | Test Result | Unit |
|---|
| UL flame retardant rating | 1.5mm | UL94 | HB | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare