Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|
| Shrinkage rate | TD:4.00mm | 内部方法 | 0.50to0.70 | % |
| Shrinkage rate | MD:4.00mm | 内部方法 | 0.50to0.70 | % |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile modulus | | ISO527-2/1 | 2600 | Mpa |
| Tensile stress | 屈服 | ISO527-2/50 | 63.0 | Mpa |
| Tensile stress | 断裂 | ISO527-2/50 | 48.0 | Mpa |
| Tensile strain | 屈服 | ISO527-2/50 | 3.0 | % |
| Tensile strain | 断裂 | ISO527-2/50 | 80 | % |
| Bending modulus 2 | | ISO178 | 2600 | Mpa |
| Bending stress 2 | | ISO178 | 95.0 | Mpa |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Hot deformation temperature | 0.45MPa,未退火 | ISO75-2/B | 94.0 | °C |
| Hot deformation temperature | 1.8MPa,未退火 | ISO75-2/A | 84.0 | °C |
| Vicat softening temperature | | ISO306/B50 | 97.0 | °C |
| Linear coefficient of thermal expansion | MD | ISO11359-2 | 8E-05 | cm/cm/°C |
| Linear coefficient of thermal expansion | TD | ISO11359-2 | 8E-05 | cm/cm/°C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Surface resistivity | | IEC60093 | 1E+16 | ohms |
| Impact performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Impact strength of simply supported beam without notch | | ISO179 | NoBreak | |
| flammability | Test Condition | Test Method | Test Result | Unit |
|---|
| UL flame retardant rating | 0.70mm | UL94 | V-2 | |
| UL flame retardant rating | 1.2mm | UL94 | V-1 | |
| UL flame retardant rating | 1.5mm | UL94 | V-0 | |
| UL flame retardant rating | 2.0mm | UL94 | 5VB | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices