Technical Data Sheet
| Physical properties | Test Condition | Test Method | Test Result | Unit |
|---|
| density | | ASTM D792/ISO 1183 | 0.919 | |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| elongation | 断裂 | ASTM D-638 | 450 | % |
| Tensile strength at break | | ASTM D-638 | 100 | kg/cm2 |
| Yield tensile strength | | ASTM D-638 | 100 | kg/cm2 |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Low temperature brittleness temperature | | ASTM D-746 | ＜-76 | °C |
| melting point | | ASTM D-3417 | 105 | °C |
| vicat softening point | | ASTM D-1525 | 85 | °C |
| vicat softening point | | ASTM D1525/ISO R306 | 85 | ℃（℉） |
| Basic performance | Test Condition | Test Method | Test Result | Unit |
|---|
| density | | ASTM D-1505 | 0.919 | g/cm³ |
| Melt index | | ASTM D-1238 | 7.0 | g/10min |
| Other performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Hot bonding strength | | | 2.8 | kg/cm2 |
| Neck-in | | | 2.7 | CM |
| Maximum coating speed | | | 350 | m/min. |
| Moisture Transmission Rate (WVTR) | 24hrs | ASTM F1249-90 | 16 | g/m2 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices