Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|
| Melt mass flow rate | 190°C/2.16kg | ASTMD1238 | 0.35 | g/10min |
| Resistance to environmental stress cracking | F50 | ASTMD1693 | 500 | hr |
| Density/specific gravity | | ASTMD1505 | 0.959 | g/cm³ |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Obvious bending modulus | | ASTMD747 | 1080 | Mpa |
| elongation | 断裂 | ASTMD638 | 500 | % |
| Tensile strength | 屈服 | ASTMD638 | 27.5 | Mpa |
| Tensile strength | 断裂 | ASTMD638 | 31.4 | Mpa |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Vicat softening temperature | | ASTMD15251 | 123 | °C |
| Brittle temperature | | ASTMD746 | -80.0 | °C |
| Melting temperature | | | 132 | °C |
| Impact performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Impact strength of cantilever beam gap | | ASTMD256 | 120 | J/m |
| hardness | Test Condition | Test Method | Test Result | Unit |
|---|
| Rockwell hardness | R级 | ASTMD785 | 55 | |
| flammability | Test Condition | Test Method | Test Result | Unit |
|---|
| UL flame retardant rating | 1.59mm | UL94 | HB | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare