Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA66 A30SFN31 LANXESS GERMANY
Durethan®
Electrical field、Electronic field、Automotive sector
Flame retardant、High mobility
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
physical property
Test Condition
Test Method
Unit
PA66/LANXESS GERMANY/A30SFN31
Density (73 ° F)
ISO 1183
g/cm³
1
Shrinkage rate
TD：270℃，2.0 mm Across Flow : 518°F, 0.0787 in 2 2
ISO 294-4
%
1
Shrinkage rate
TD：120℃，2.0 mm，2 hrs Across Flow : 120°C, 2 hr, 2.00 mm 3 3
ISO 294-4
%
0
Shrinkage rate
MD：270℃，2.0 mm Flow : 518°F, 0.0787 in 2 2
ISO 294-4
%
1
Shrinkage rate
MD：120℃，2.0 mm，2 hrs Flow : 120°C, 2 hr, 2.00 mm 3 3
ISO 294-4
%
0
Mechanical performance
Test Condition
Test Method
Unit
PA66/LANXESS GERMANY/A30SFN31
Tensile modulus
23℃ 23℃
ISO 527-1-2
Mpa
3
Tensile strength
屈服，23℃ 屈服，23℃
ISO 527-2/50
Mpa
8
Tensile strain
屈服，23℃ 屈服，23℃
ISO 527-2/50
%
4
Bending modulus 4
23℃ 23℃ 4
ISO 178-A
Mpa
3
Bending strength
3.50% 应变 3.5% Strain
ISO 178-A
Mpa
1
Bending strength
23℃ 23°C
ISO 178
Mpa
1
Impact performance
Test Condition
Test Method
Unit
PA66/LANXESS GERMANY/A30SFN31
Impact strength of simply supported beam without notch
-30℃ -30°C
ISO 179/1eU
kJ/m²
5
Impact strength of simply supported beam without notch
23℃ 23°C
ISO 179/1eU
kJ/m²
6
Impact strength of cantilever beam gap
23℃ 23℃
ISO 180-1A
kJ/m²
<
Cantilever beam without notch impact strength
-30℃ -30°C
ISO 180/1U
kJ/m²
5
Cantilever beam without notch impact strength
23℃ 23°C
ISO 180/1U
kJ/m²
5
Thermal performance
Test Condition
Test Method
Unit
PA66/LANXESS GERMANY/A30SFN31
Melting temperature
ISO 11357-3
°C
2
Vicat softening temperature
B120 B120
ISO 306/B120
°C
2
Linear coefficient of thermal expansion
MD：23~55℃ MD：23 到 55℃
ISO 11359-2
1/℃
0
Linear coefficient of thermal expansion
TD：23~55℃ TD：23 到 55℃
ISO 11359-2
1/℃
0
Flame retardant performance
Test Condition
Test Method
Unit
PA66/LANXESS GERMANY/A30SFN31
Ultimate Oxygen Index 7 7
ISO 4589-2
%
3
Flammability index of heating wire
0.40 mm 0.40 mm
IEC 60695-2-12
°C
9
Ignition temperature of heating wire
0.4 mm 0.40 mm
IEC 60695-2-13
°C
7
Electrical performance
Test Condition
Test Method
Unit
PA66/LANXESS GERMANY/A30SFN31
Surface resistivity
IEC 60093
ohms
1
Dielectric strength
23 ℃，1 mm 23℃，1.00 mm
IEC 60243-1
KV/mm
3
Volume resistivity
23℃ 23℃
IEC 60093
ohms·cm
1
Compared to the leakage trace index
解决方案 A 解决方案 A
IEC 60112
V
6