Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
ABS GP-22 INEOS STYRO KOREA
Terluran®
Electronic communication 、small home appliances
High mobility
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
physical property
Test Condition
Test Method
Unit
ABS/INEOS STYRO KOREA/GP-22
Density/specific gravity
ASTMD792
g/cm³
1
Density/specific gravity
ISO1183
g/cm³
1
Melt volume flow rate
230°C/3.8kg
ASTMD1238
cm3/10min
4
Melt volume flow rate
220°C/10.0kg
ISO1133
cm3/10min
1
Melt mass flow rate
200°C/5.0kg
ASTMD1238
g/10min
1
Melt mass flow rate
220°C/10.0kg
ASTMD1238
g/10min
1
Shrinkage rate
MD
ASTMD955
%
0
Shrinkage rate
ISO294-4
%
0
Water absorption rate
饱和,23°C
ASTMD570
%
1
Water absorption rate
饱和,23°C
ISO62
%
1
Water absorption rate
平衡,23°C,50%RH
ISO62
%
0
Mechanical performance
Test Condition
Test Method
Unit
ABS/INEOS STYRO KOREA/GP-22
Nominal tensile fracture strain
23°C
ISO527-2
%
1
Tensile strength
屈服,23°C
ASTMD638
Mpa
4
Tensile modulus
ASTMD638
Mpa
2
Tensile modulus
ISO527-2
Mpa
2
Tensile strain
屈服,23°C
ISO527-2
%
2
Tensile stress
屈服,23°C
ISO527-2
Mpa
4
elongation
断裂
ASTMD638
%
2
Bending modulus
ASTMD790
Mpa
2
bending strength
ASTMD790
Mpa
6
Bending stress
ISO178
Mpa
6
Thermal performance
Test Condition
Test Method
Unit
ABS/INEOS STYRO KOREA/GP-22
thermal conductivity
DIN52612
W/m/K
0
Hot deformation temperature
0.45MPa,未退火
ASTMD648
°C
9
Hot deformation temperature
0.45MPa,退火
ASTMD648
°C
1
Hot deformation temperature
1.8MPa,未退火
ASTMD648
°C
7
Hot deformation temperature
1.8MPa,退火
ASTMD648
°C
9
Hot deformation temperature 2
1.8MPa,退火
ISO75-2/A
°C
9
Hot deformation temperature 2
0.45MPa,Annealed
ISO75-2/B
°C
9
Vicat softening temperature
--
ISO306/A50
°C
1
Vicat softening temperature
--
ISO306/B50
°C
9
Linear coefficient of thermal expansion
MD
ISO11359-2
cm/cm/°C
8
Electrical performance
Test Condition
Test Method
Unit
ABS/INEOS STYRO KOREA/GP-22
Surface resistivity
IEC60093
ohms
1
Volume resistivity
ASTMD257
ohms·cm
>
Volume resistivity
IEC60093
ohms·cm
1
Impact performance
Test Condition
Test Method
Unit
ABS/INEOS STYRO KOREA/GP-22
Charpy Notched Impact Strength
-30°C
ISO179
kJ/m²
8
Charpy Notched Impact Strength
23°C
ISO179
kJ/m²
2
Impact strength of simply supported beam without notch
-30°C
ISO179
kJ/m²
1
Impact strength of simply supported beam without notch
23°C
ISO179
kJ/m²
1
Impact strength of cantilever beam gap
-30°C
ASTMD256
J/m
5
Impact strength of cantilever beam gap
-18°C
ASTMD256
J/m
1
Impact strength of cantilever beam gap
23°C
ASTMD256
J/m
3
Impact strength of cantilever beam gap
-30°C
ISO180/A
kJ/m²
8
Impact strength of cantilever beam gap
23°C
ISO180/A
kJ/m²
2
hardness
Test Condition
Test Method
Unit
ABS/INEOS STYRO KOREA/GP-22
Ball pressure hardness
ISO2039-1
Mpa
9
optical performance
Test Condition
Test Method
Unit
ABS/INEOS STYRO KOREA/GP-22
Huangdu Index
DIN6167
YI
1