Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC/PTFE DL-4530-BK SABIC INNOVATIVE US
LNP™ LUBRICOMP™
Gear、Electronic and Electrical、Automotive components
Thermal stability、High temperature resistan
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
physical property
Test Condition
Test Method
Unit
PC/PTFE/SABIC INNOVATIVE US/DL-4530-BK
Shrinkage rate
MD：24小时
ASTMD955
%
0
Shrinkage rate
TD:24小时
ISO294-4
%
0
Shrinkage rate
MD:24小时
ISO294-4
%
0
Water absorption rate
24hr,50%RH
ASTMD570
%
0
Water absorption rate
平衡,23°C,50%RH
ISO62
%
0
Mechanical performance
Test Condition
Test Method
Unit
PC/PTFE/SABIC INNOVATIVE US/DL-4530-BK
Tensile strength
屈服
ASTMD638
Mpa
5
Tensile strength
断裂
ASTMD638
Mpa
4
Tensile modulus
ISO527-2/1
Mpa
2
Tensile modulus 2
ASTMD638
Mpa
2
Tensile strain
屈服
ISO527-2
%
5
Tensile stress
断裂
ISO527-2
Mpa
5
Tensile stress
屈服
ISO527-2
Mpa
5
Wear factor - Washer
ASTMD3702Modified
10^-10in^5-min/ft-lb-hr
6
elongation
断裂
ASTMD638
%
3
elongation
屈服
ASTMD638
%
6
Bending modulus
ASTMD790
Mpa
2
Bending modulus
ISO178
Mpa
2
bending strength
ASTMD790
Mpa
8
Bending stress
ISO178
Mpa
8
Thermal performance
Test Condition
Test Method
Unit
PC/PTFE/SABIC INNOVATIVE US/DL-4530-BK
Hot deformation temperature
1.8MPa,未退火,3.20mm
ASTMD648
°C
1
Hot deformation temperature 4
1.8MPa,未退火,64.0mm跨距
ISO75-2/Af
°C
1
Impact performance
Test Condition
Test Method
Unit
PC/PTFE/SABIC INNOVATIVE US/DL-4530-BK
UnnotchedIzodImpactStrength3
23°C
ISO180/1U
kJ/m²
1
Multi axis Instrumented Impact Energy
ISO6603-2
J
3
Suspended wall beam gap impact strength 3
23°C
ISO180/1A
kJ/m²
2
Dart impact equipped with measuring instruments
23°C,EnergyatPeakLoad
ASTMD3763
J
3