Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
POM CH-15 JAPAN POLYPLASTIC
DURACON®
Electronic and electrical、Fitness equipment
Conductive、wear resistant
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
physical property
Test Condition
Test Method
Unit
POM/JAPAN POLYPLASTIC/CH-15
density
ISO 1183
g/cm³
1
Melt flow rate
190°C/2.16 kg
ISO 1133
g/10 min
3
Molten Volume Flow Rate (MVR)
190°C/2.16 kg
ISO 1133
cm3/10min
2
Mechanical performance
Test Condition
Test Method
Unit
POM/JAPAN POLYPLASTIC/CH-15
Tensile modulus
ISO 527-2
Mpa
1
Tensile strain
断裂
ISO 527-2
%
1
Tensile stress
ISO 527-2
Mpa
1
Wear factor
0.49 MPa, 0.30 m/sec 4
JIS K7218
10^-8 mm³/N·m
1
Wear factor
0.060 MPa, 0.15 m/sec 5
JIS K7218
10^-8 mm³/N·m
2
Wear factor
0.49 MPa, 0.30 m/sec 6
JIS K7218
10^-8 mm³/N·m
5
Wear factor
0.060 MPa, 0.15 m/sec 7
JIS K7218
10^-8 mm³/N·m
1
Bending modulus
ISO 178
Mpa
1
Bending stress
ISO 178
Mpa
1
Thermal performance
Test Condition
Test Method
Unit
POM/JAPAN POLYPLASTIC/CH-15
Hot deformation temperature
1.8 MPa, 未退火
ISO 75-2/A
°C
1
Linear coefficient of thermal expansion
流动 : 23 到 55°C
内部方法
cm/cm/°C
1
Linear coefficient of thermal expansion
横向 : 23 到 55°C
内部方法
cm/cm/°C
9
Electrical performance
Test Condition
Test Method
Unit
POM/JAPAN POLYPLASTIC/CH-15
Surface resistivity
IEC 60093
ohms
3
Volume resistivity
IEC 60093
ohms·cm
1
Impact performance
Test Condition
Test Method
Unit
POM/JAPAN POLYPLASTIC/CH-15
Charpy Notched Impact Strength
23°C
ISO 179/1eA
kJ/m²
4