Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Density / Specific Gravity | | ASTM D792 | 1.66 | g/cm³ |
Modeling Shrinkage | Across Flow : 1.00 mm | 内部方法 | 0.55 | % |
Modeling Shrinkage | 流量 : 1.00 mm | 内部方法 | 0.050 | % |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Elongation | Break | ASTM D638 | 3.0 | % |
Flexural Modulus | | ASTM D790 | 16000 | Mpa |
Flexural Strength | | ASTM D790 | 220 | Mpa |
Tensile Strength | | ASTM D638 | 175 | Mpa |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Deflection Temperature Under Load? | 1.8 MPa, Unannealed | ASTM D648 | 255 | °C |
Coefficient of Linear Thermal Expansion (Flow) | | ASTM D696 | 1.0E-5 到 1.5E-5 | cm/cm/°C |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|
Comparative Tracking Index | | UL 746 | PLC 3 | |
Impact Properties | Test Condition | Test Method | Test Result | Unit |
---|
Notched Izod Impact Strength | | ASTM D256 | 90 | J/m |
Flammability | Test Condition | Test Method | Test Result | Unit |
---|
Flame Rating | 0.150 mm | UL 94 | V-0 | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.