Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Modeling Shrinkage | normal | ISO 2577 | 0.0 | % |
Modeling Shrinkage | parallel | ISO 2577 | 0.70 | % |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Creep Modulus | 1hr | ISO 899-1 | 9000 | Mpa |
Tensile Creep Modulus | 1000hr | ISO 899-1 | 6600 | Mpa |
Charpy Notched Impact Strength | 23℃ | ISO 179/1eA | 95.0 | KJ/m |
Tensile Modulus | | ISO 527-1,-2/1 | 10600 | Mpa |
Flexural Modulus | 23℃ | ISO 178 | 9100 | Mpa |
Flexural Strength | 23℃ | ISO 178 | 158 | Mpa |
Unnotched Izod Impact Strength | 23℃ | ISO 180/1U | 252 | KJ/m |
Fracture strain | | ISO 527-1,-2/5 | 3.4 | % |
Tensile Stress(Break) | | ISO 527-1,-2/5 | 182 | Mpa |
IZOD Notch Impact Strength | 23℃ | ISO 180/1A | 95.0 | KJ/m |
Charpy impact strength | 23℃ | ISO 179/1eU | 267 | KJ/m |
Charpy impact strength | -30℃ | ISO 179/1eU | 53.0 | KJ/m |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Deflection Temperature Under Load? | 1.80MPa | ISO 75-1,-2 | 187 | °C |
Vicat Softening Temperature | 50℃/h 50N | ISO 306 | 145 | °C |
Flammability | | UL 94 | V-0 | |
Coefficient of Linear Thermal Expansion | parallel | ISO 11359-1,-2 | 4E-06 | cm/cm℃ |
Coefficient of Linear Thermal Expansion | normal | ISO 11359-1,-2 | 0.000038 | cm/cm℃ |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|
Dielectric Strength | | IEC 60243-1 | 47 | KV/mm |
Dissipation Factor? | 100Hz | IEC 60250 | 0.016 | |
Dissipation Factor? | 1000Hz | IEC 60250 | 0.020 | |
Surface Resistivity | | IEC 60093 | 1E+14 | ohms |
Volume Resistivity | | IEC 60093 | 1E+13 | ohm.m |
Relative Permittivity | 100Hz | IEC 60250 | 3.20 | |
Relative Permittivity | 1000Hz | IEC 60250 | 3.00 | |
Physical | Test Condition | Test Method | Test Result | Unit |
---|
Moisture Absorption | 23℃/50rh | ISO 62 | 0.030 | % |
Density / Specific Gravity | | ISO 1183 | 1400 | kg/m |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.