Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Moisture Absorption | Saturation,23°C | ISO62 | 0.50 | % |
Moisture Absorption | Equilibrium,23°C,50%RH | ISO62 | 0.20 | % |
Melt Volume flow Rate | 240°C/5.0kg | ISO1133 | 25.0 | cm3/10min |
Spiral Flow | | 内部方法 | 48.0 | CM |
Modeling Shrinkage | TD:240°C,3.00mm | ISO2577 | 0.50to0.70 | % |
Modeling Shrinkage | MD:240°C,3.00mm | ISO2577 | 0.50to0.70 | % |
Melt Viscosity | 260°C | ISO11443-A | 150 | Pa·s |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Stress | Yield,23°C | ISO527-2/50 | 60.0 | Mpa |
Tensile Stress | Break,23°C | ISO527-2/50 | 50.0 | Mpa |
Tensile Strain | Yield,23°C | ISO527-2/50 | 4.0 | % |
Tensile Strain | Break,23°C | ISO527-2/50 | >30 | % |
Tensile Modulus | 23°C | ISO527-2/1 | 2700 | Mpa |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Deflection Temperature Under Load? | 0.45MPa,Unannealed | ISO75-2/B | 98.0 | °C |
Deflection Temperature Under Load? | 1.8MPa,Unannealed | ISO75-2/A | 88.0 | °C |
Linear thermal expansion coefficient | MD:23to55°C | ISO11359-2 | 7.6E-05 | cm/cm/°C |
Linear thermal expansion coefficient | TD:23to55°C | ISO11359-2 | 8E-05 | cm/cm/°C |
Vicat Softening Temperature | | ISO306/B120 | 103 | °C |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|
Relative Permittivity | 23°C,100Hz | IEC60250 | 3.20 | |
Relative Permittivity | 23°C,1MHz | IEC60250 | 3.10 | |
Comparative Tracking Index | SolutionA | IEC60112 | 300 | V |
Dielectric Strength | 23°C,1.00mm | IEC60243-1 | 30 | KV/mm |
Surface Resistivity | | IEC60093 | 1E+16 | ohms |
Volume Resistivity | 23°C | IEC60093 | 1E+16 | ohms·cm |
Dissipation Factor? | 23°C,100Hz | IEC60250 | 5E-03 | |
Dissipation Factor? | 23°C,1MHz | IEC60250 | 7E-03 | |
Impact Properties | Test Condition | Test Method | Test Result | Unit |
---|
Notched Izod impact strength | 23°C | ISO180 | NoBreak | |
Flammability | Test Condition | Test Method | Test Result | Unit |
---|
UL flame retardant rating | 1.5mm | UL94 | V-0 | |
UL flame retardant rating | 2.0mm | UL94 | 5VB | |
UL flame retardant rating | 3.0mm | UL94 | 5VA | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.