Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Melt Mass-Flow Rate | 260°C/5.0kg | ASTMD1238 | 14 | g/10min |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Strain | Yield | ISO527-2/50 | 5.7 | % |
Tensile Strain | Break | ISO527-2/50 | >100 | % |
Tensile Elongation | Yield | ASTMD638 | 6.0 | % |
Tensile Modulus | | ASTMD638 | 2330 | Mpa |
Tensile Strength | Yield | ASTMD638 | 64.0 | Mpa |
Tensile Strength | Break | ASTMD638 | 62.0 | Mpa |
Tensile Elongation | Break | ASTMD638 | 85 | % |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Deflection Temperature Under Load? | 1.8MPa,Unannealed,6.40mm | ASTMD648 | 118 | °C |
Ball PressureTest | 125°C | IEC60695-10-2 | Pass | |
Ball PressureTest | 125°C5 | IEC60695-10-2 | Pass | |
Vicat Softening Temperature | -- | ISO306/B50 | 134 | °C |
Vicat Softening Temperature | -- | ISO306/B120 | 135 | °C |
Linear thermal expansion coefficient | MD:-40to40°C | ISO11359-2 | 7E-05 | cm/cm/°C |
Linear thermal expansion coefficient | TD:-40to40°C | ISO11359-2 | 7E-05 | cm/cm/°C |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|
Comparative Tracking Index | CTI | UL746 | PLC3 | |
Surface Resistivity | | IEC60093 | 0.0to4.0E+16 | ohms |
Dielectric Constant | 1kHz | ASTMD150 | 3.01 | |
Dielectric Constant | 1MHz | ASTMD150 | 2.95 | |
Dissipation Factor? | 1kHz | ASTMD150 | 1.7E-03 | |
Dissipation Factor? | 1MHz | ASTMD150 | 8.8E-03 | |
Dissipation Factor? | 1MHz | IEC60250 | 8.8E-03 | |
Hot-wire Ignition | HWI | UL746 | PLC2 | |
High Amp Arc Ignition | HAI | UL746 | PLC1 | |
Impact Properties | Test Condition | Test Method | Test Result | Unit |
---|
Charpy Notched Impact Strength | -30°C | ISO179/1eA | 12 | kJ/m² |
Charpy Notched Impact Strength | 0°C | ISO179/1eA | 17 | kJ/m² |
Charpy Notched Impact Strength | 23°C | ISO179/1eA | 28 | kJ/m² |
Flammability | Test Condition | Test Method | Test Result | Unit |
---|
GlowWireFlammabilityIndex5 | 0.75mm | IEC60695-2-12 | 960 | °C |
Glow Wire Ignition Temperature | 0.75mm | IEC60695-2-13 | 775 | °C |
Glow Wire Ignition Temperature | 1.5mm | IEC60695-2-13 | 775 | °C |
Glow Wire Ignition Temperature | 3.0mm | IEC60695-2-13 | 775 | °C |
Oxygen Index | | ISO4589-2 | 32 | % |
UL flame retardant rating | 1.2mm | UL94 | V-0 | |
UL flame retardant rating | 2.5mm | UL94 | 5VB | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.