PC LUX2114-WH5G007X SABIC INNOVATIVE NANSHA

Unit Price:
$4112 USD/MT
Packaging Specification:
25 KG/PKG
Supply Quantity:
10MT
Delivery Terms:
FOB
Port of Loading:
China Main Port
Accepted Payment Methods:
T/T
Shipping:
Negotiate supplier for shipping details

Supplier Information

ASIA PLASTIC EXCHANGE LIMITED

+86 755 2787 3515

serv********

For more detailed information including pricing, customization, and shipping, please contact supplier.

Material Description

Material Properties:--
Application Areas:--
Color:--
Grade:--

Technical Data Sheet

Physical Properties	Test Condition	Test Method	Test Result	Unit
Modeling Shrinkage	MD：3.20mm	内部方法	0.50到0.70	%
Moisture Absorption	24hr	ASTMD570	0.15	%
	Moisture Absorption	Equilibrium,23°C	ASTMD570	0.35	%
	Moisture Absorption	Moisture Absorption	Equilibrium,100°C	ASTMD570	0.58	%
Melt Mass-Flow Rate	300°C/1.2kg	ASTMD1238	18	g/10min
Specific Volume		ASTMD792	0.830	cm³/g
Outdoor Suitability		UL746C	f2

Mechanical Properties	Test Condition	Test Method	Test Result	Unit
Tensile Strength	Yield	ASTMD638	62.1	Mpa
Tensile Strength	Tensile Strength	Break	ASTMD638	65.5	Mpa
Taber Abrasion Resistance	1000Cycles,1000g,CS-17Wheel	ASTMD1044	10.0	mg
Flexural Modulus	50.0mmSpan	ASTMD790	2340	Mpa
Tensile Elongation	Yield	ASTMD638	7.0	%
Tensile Elongation	Tensile Elongation	Break	ASTMD638	110	%
Flexural Strength	Yield,50.0mmSpan	ASTMD790	93.1	Mpa

Thermal Properties	Test Condition	Test Method	Test Result	Unit
Linear thermal expansion coefficient	MD：-40to95°C	ASTME831	6.8E-05	cm/cm/°C
Specific Heat		ASTMC351	1260	J/kg/°C
Thermal Conductivity		ASTMC177	0.25	W/m/K
RTI		UL746	80.0	°C
Ball PressureTest	125°C	IEC60695-10-2	Pass
Deflection Temperature Under Load?	0.45MPa,Unannealed,6.40mm	ASTMD648	138	°C
Deflection Temperature Under Load?	Deflection Temperature Under Load?	1.8MPa,Unannealed,6.40mm	ASTMD648	132	°C
RTIElec		UL746	80.0	°C
Evolution Calendar intelligent importer		UL746	80.0	°C
Vicat Softening Temperature		ASTMD152512	154	°C

Electrical performance	Test Condition	Test Method	Test Result	Unit
Dissipation Factor?	50Hz	ASTMD150	9E-04
	Dissipation Factor?	60Hz	ASTMD150	9E-04
	Dissipation Factor?	Dissipation Factor?	1MHz	ASTMD150	0.010
Dielectric Constant	50Hz	ASTMD150	3.17
	Dielectric Constant	60Hz	ASTMD150	3.17
	Dielectric Constant	Dielectric Constant	1MHz	ASTMD150	2.96
Volume Resistivity		ASTMD257	>1.0E+17	ohms·cm
Comparative Tracking Index	CTI	UL746	PLC3
Dielectric Strength	3.20mm,inAir	ASTMD149	15	KV/mm
Hot-wire Ignition	HWI	UL746	PLC3
High Amp Arc Ignition	HAI	UL746	PLC1

Impact Properties	Test Condition	Test Method	Test Result	Unit
Gardner Impact	23°C	ASTMD3029	169	J
23°C		ASTMD256	600	J/m
23°C	23°C		ASTMD4812	3200	J/m
23°C10		ISO180/1U	无断裂
Charpy Unnotched Impact Strength	-30°C	ISO179/1eU	无断裂
Charpy Unnotched Impact Strength	Charpy Unnotched Impact Strength	23°C	ISO179/1eU	无断裂
23°C8		ISO180/1A	65	kJ/m²
-30°C9		ISO180/1U	无断裂
Charpy Notched Impact Strength	-30°C	ISO179/1eA	12	kJ/m²
Charpy Notched Impact Strength	Charpy Notched Impact Strength	23°C	ISO179/1eA	65	kJ/m²
-30°C7		ISO180/1A	11	kJ/m²
Tensile Impact Strength		ASTMD1822	546	kJ/m²

hardness	Test Condition	Test Method	Test Result	Unit
Rockwell Hardness	M-Scale	ASTMD785	70
Rockwell Hardness	Rockwell Hardness	R-Scale	ASTMD785	118

Flammability	Test Condition	Test Method	Test Result	Unit
UL flame retardant rating	0.750to1.65mm	UL94	V-2
Glow Wire Flammability Index	0.750mm	IEC60695-2-12	750	°C
Glow Wire Flammability Index	Glow Wire Flammability Index	1.50mm	IEC60695-2-12	850	°C
Glow Wire Ignition Temperature	0.750mm13	IEC60695-2-13	875	°C
Glow Wire Ignition Temperature	Glow Wire Ignition Temperature	1.50mm	IEC60695-2-13	850	°C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.