PC LEXAN™ EXL9112-GY2D379L SABIC INNOVATIVE NANSHA

Unit Price:
$4171 USD/MT
Packaging Specification:
25 KG/PKG
Supply Quantity:
38MT
Delivery Terms:
FOB
Port of Loading:
China Main Port
Accepted Payment Methods:
T/T
Shipping:
Negotiate supplier for shipping details

Supplier Information

ASIA PLASTIC EXCHANGE LIMITED

+86 755 2787 3515

serv********

For more detailed information including pricing, customization, and shipping, please contact supplier.

Material Description

Technical Data Sheet

Material Description

Material Properties:High mobility Ductility at low temperat Short molding cycle
Application Areas:Electronic and Electrical Electronic display Industrial applications lens
Color:--
Grade:--

Technical Data Sheet

Physical Properties	Test Condition	Test Method	Test Result	Unit
Melt Mass-Flow Rate	300°C/1.2 kg	ASTM D1238	17	g/10 min
Melt Volume flow Rate	300°C/1.2 kg	ISO 1133	16.0	cm3/10min
Modeling Shrinkage	Flow : 3.20 mm	内部方法	0.40 到 0.80	%
Modeling Shrinkage	Modeling Shrinkage	Across Flow : 3.20 mm	内部方法	0.40 到 0.80	%
Moisture Absorption	Saturation, 23°C	ISO 62	0.35	%
Moisture Absorption	Moisture Absorption	Equilibrium, 23°C, 50% RH	ISO 62	0.15	%
Outdoor Suitability		UL 746C	f1

Mechanical Properties	Test Condition	Test Method	Test Result	Unit
Tensile Modulus	-- 2	ASTM D638	2260	Mpa
Tensile Modulus	Tensile Modulus	--	ISO 527-2/1	2200	Mpa
Tensile Strength	Yield 3	ASTM D638	58.0	Mpa
	Tensile Strength	Yield	ISO 527-2/50	59.0	Mpa
		Tensile Strength	Break 3	ASTM D638	58.0	Mpa
		Tensile Strength	Tensile Strength	Break	ISO 527-2/50	55.0	Mpa
Tensile Elongation	Yield 3	ASTM D638	5.8	%
	Tensile Elongation	Yield	ISO 527-2/50	5.0	%
		Tensile Elongation	Break 3	ASTM D638	100	%
		Tensile Elongation	Tensile Elongation	Break	ISO 527-2/50	100	%
Flexural Modulus	50.0 mm Span 4	ASTM D790	2330	Mpa
Flexural Modulus	Flexural Modulus	-- 5	ISO 178	2300	Mpa
Flexural Stress	-- 5, 6	ISO 178	88.0	Mpa
Flexural Stress	Flexural Stress	Yield, 50.0 mm Span 4	ASTM D790	95.0	Mpa

Thermal Properties	Test Condition	Test Method	Test Result	Unit
Deflection Temperature Under Load?	0.45 MPa, Unannealed, 3.20 mm	ASTM D648	136	°C
	Deflection Temperature Under Load?	0.45 MPa, Unannealed, 4.00 mm, 100 mm Span 10	ISO 75-2/Be	136	°C
		Deflection Temperature Under Load?	1.8 MPa, Unannealed, 3.20 mm	ASTM D648	123	°C
		Deflection Temperature Under Load?	Deflection Temperature Under Load?	1.8 MPa, Unannealed, 4.00 mm, 100 mm Span 10	ISO 75-2/Ae	124	°C
Vicat Softening Temperature	--	ASTM D152511, ISO 306/B5011	143	°C
Vicat Softening Temperature	Vicat Softening Temperature	--	ISO 306/B120	144	°C
Ball PressureTest	123 to 127°C	IEC 60695-10-2	通过
Linear thermal expansion coefficient	Flow : -40 to 40°C	ASTM E831	7.2E-5	cm/cm/°C
	Linear thermal expansion coefficient	Flow : 23 to 80°C	ISO 11359-2	7.5E-5	cm/cm/°C
		Linear thermal expansion coefficient	Across Flow : -40 to 40°C	ASTM E831	7.2E-5	cm/cm/°C
		Linear thermal expansion coefficient	Linear thermal expansion coefficient	Across Flow : 23 to 80°C	ISO 11359-2	7.5E-5	cm/cm/°C
RTI Elec		UL 746	130	°C
RTI Imp		UL 746	120	°C
RTI		UL 746	130	°C

Electrical performance	Test Condition	Test Method	Test Result	Unit
Dielectric Strength	3.20 mm, in Oil	IEC 60243-1	19	KV/mm
Relative Permittivity	50 Hz	IEC 60250	2.70
	Relative Permittivity	60 Hz	IEC 60250	2.70
	Relative Permittivity	Relative Permittivity	1 MHz	IEC 60250	2.70
Dissipation Factor?	50 Hz	IEC 60250	4.0E-4
	Dissipation Factor?	60 Hz	IEC 60250	4.0E-4
	Dissipation Factor?	Dissipation Factor?	1 MHz	IEC 60250	0.010
Comparative Tracking Index		IEC 60112	175	V

Injection	Test Result	Unit
Drying Temperature	120	°C
Drying Time	3.0 到 4.0	hr
Suggested Max Moisture	0.020	%
Suggested Shot Size	40 到 60	%
Rear Temperature	215 到 295	°C
Middle Temperature	280 到 305	°C
Front Temperature	295 到 315	°C
Nozzle Temperature	290 到 310	°C
Processing (Melt) Temp	295 到 315	°C
Mold Temperature	70 到 95	°C
Back Pressure	0.300 到 0.700	Mpa
Screw Speed	40 到 70	rpm
Vent Depth	0.025 到 0.076	mm

Impact Properties	Test Condition	Test Method	Test Result	Unit
Charpy Notched Impact Strength	-30°C	ISO 179/1eA	25	kJ/m²
Charpy Notched Impact Strength	Charpy Notched Impact Strength	23°C	ISO 179/1eA	60	kJ/m²
Unnotched Izod Impact Strength	-30°C	ISO 180/1U	无断裂
Unnotched Izod Impact Strength	Unnotched Izod Impact Strength	23°C	ISO 180/1U	无断裂
Instrumented Dart Impact	23°C, Total Energy	ASTM D3763	67.0	J

hardness	Test Condition	Test Method	Test Result	Unit
Ball Indentation Hardness	H 358/30	ISO 2039-1	95.0	Mpa

Flammability	Test Condition	Test Method	Test Result	Unit
Flame Rating	1.5 mm	UL 94	V-0
Flame Rating	Flame Rating	3.0 mm	UL 94	5VA
Glow Wire Flammability Index	1.0 mm	IEC 60695-2-12	960	°C
Glow Wire Ignition Temperature	1.0 mm	IEC 60695-2-13	825	°C
Oxygen Index		ISO 4589-2	40	%

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.