Technical Data Sheet
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Transmittance | 3mm厚 | ASTM D-1003 | 85-89 | % |
| Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile Elongation | | ISO R-527 (ASTM D-638) | 2300 | Mpa |
| Tensile Elongation?(Break) | | ISO R-527 (ASTM D-638) | 115 | % |
| Tensile Strength (Break) | | ISO R-527 (ASTM D-638) | 68 | Mpa |
| Tensile Strength (Yield) | | ISO R-527 (ASTM D-638) | 64 | Mpa |
| Rockwell Hardness | | ISO 2039-2 (ASTM D-785) | 120 | R |
| Flexural strength | | ISO 178 (ASTM D-790) | 93 | Mpa |
| Taber wear | 1,000round | ASTM D-1044 | 12 | mg |
| Tensile Modulus | | ISO 178 (ASTM D-790) | 2350 | Mpa |
| Izod Impact Strength | 4mm with notch 3.2mm with notch | ISO 180 (ASTM D-256) | 70 | KJ/m |
| Thermal Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Deflection Temperature Under Load? | 1.8Mpa 18.6kg/cm | ISO 75 (ASTM D-648) | 132 | °C |
| Vicat Softening Temperature | | ISO 306 | 148 | °C |
| Flammability | 1.47mm厚 | UL-94 | V-2 | |
| Coefficient of Linear Thermal Expansion | | ASTM D-696 (ASTM D-695) | 6.5 | |
| Processing | Test Condition | Test Method | Test Result | Unit |
|---|
| Modeling Shrinkage | | ASTM D-955 | 0.5-0.7 | % |
| Physical | Test Condition | Test Method | Test Result | Unit |
|---|
| Density / Specific Gravity | | ASTM D-792 | 1.2 | g/cm |
| Moisture Absorption | 23℃水中24h | ASTM D-570 | 0.23 | % |
| Melt index | 300℃ 1.2kg | ISO 1133 (ASTM D-1238) | 12 | g/10min |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
