PC LEXAN™ 1414T NA8A005T SABIC INNOVATIVE NANSHA
217
- Unit Price:
- $4932 USD/MT
- Packaging Specification:
- 25 KG/PKG
- Supply Quantity:
- 108MT
- Delivery Terms:
- FOB
- Port of Loading:
- China Main Port
- Accepted Payment Methods:
- T/T
- Shipping:
- Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 2787 3515View
serv********View
For more detailed information including pricing, customization, and shipping, please contact supplier.
Material Description
Technical Data Sheet
Material Description
- Material Properties:Low temperature resistanc transparent Easy to process Middle flow
- Application Areas:Electrical field Electronic field Household appliances Fitness equipment
- Color:--
- Grade:Injection grade
Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Shrinkage rate | Across Flow : 3.20 mm | 内部方法 | 0.40 到 0.80 | % |
| Flow : 3.20 mm | 内部方法 | 0.40 到 0.80 | % | |
| Flow 2 | 内部方法 | 0.40 到 0.80 | % | |
| Water absorption rate | Equilibrium, 23°C, 50% RH | ISO 62 | 0.090 | % |
| Saturation, 23°C | ISO 62 | 0.12 | % | |
| Melt flow rate | 300°C/1.2 kg | ASTM D1238 | 10 | g/10 min |
| Molten Volume Flow Rate (MVR) | 300°C/1.2 kg | ISO 1133 | 9.00 | cm3/10min |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Tensile modulus | -- | ISO 527-2/1 | 2300 | Mpa |
| -- 3 | ASTM D638 | 2240 | Mpa | |
| elongation | Break | ISO 527-2/50 | 110 | % |
| Break 4 | ASTM D638 | 84 | % | |
| Yield | ISO 527-2/50 | 5.4 | % | |
| Yield 4 | ASTM D638 | 5.8 | % | |
| Bending modulus | -- 6 | ISO 178 | 2150 | Mpa |
| 50.0 mm Span 5 | ASTM D790 | 2220 | Mpa | |
| Tensile strength | Break | ISO 527-2/50 | 54.0 | Mpa |
| Break 4 | ASTM D638 | 51.0 | Mpa | |
| Yield | ISO 527-2/50 | 57.0 | Mpa | |
| Yield 4 | ASTM D638 | 59.0 | Mpa | |
| Bending stress | Yield, 50.0 mm Span 5 | ASTM D790 | 85.0 | Mpa |
| -- 6, 7 | ISO 178 | 89.0 | Mpa |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Vicat softening temperature | -- | ASTM D152511, ISO 306/B5011 | 138 | °C |
| -- | ISO 306/B120 | 142 | °C | |
| Linear coefficient of thermal expansion | Flow : -40 to 95°C | ASTM E831 | 6.7E-5 | cm/cm/°C |
| Flow : 23 to 80°C | ISO 11359-2 | 6.7E-5 | cm/cm/°C | |
| Across Flow : -40 to 95°C | ASTM E831 | 8.0E-5 | cm/cm/°C | |
| Across Flow : 23 to 80°C | ISO 11359-2 | 8.0E-5 | cm/cm/°C | |
| Thermal deformation temperature under load | 1.8 MPa, Unannealed, 3.20 mm | ASTM D648 | 122 | °C |
| 1.8 MPa, Unannealed, 4.00 mm, 64.0 mm Span 10 | ISO 75-2/Af | 116 | °C | |
| Ball Pressure Test | 123 to 127°C | IEC 60695-10-2 | 通过 |
| injection | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| drying time | 3.0 到 4.0 | hr | ||
| Suggested injection volume | 40 到 60 | % | ||
| Temperature at the rear of the barrel | 215 到 295 | °C | ||
| Temperature in the middle of the barrel | 280 到 305 | °C | ||
| Temperature at the front of the material cylinder | 295 到 315 | °C | ||
| Spray nozzle temperature | 290 到 310 | °C | ||
| Back pressure | 0.300 到 0.700 | Mpa | ||
| Screw speed | 40 到 70 | rpm | ||
| Exhaust hole depth | 0.025 到 0.076 | mm | ||
| drying temperature | 120 | °C | ||
| Suggested maximum moisture content | 0.020 | % | ||
| Processing (melt) temperature | 295 到 315 | °C | ||
| Mold temperature | 70 到 95 | °C |
| Impact performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Unscented Izod Impact Strength 9 | -30°C | ISO 180/1U | 无断裂 | |
| 23°C | ISO 180/1U | 无断裂 | ||
| Impact strength of simply supported beam gap 8 | 23°C | ISO 179/1eA | 70 | kJ/m² |
| -30°C | ISO 179/1eA | 60 | kJ/m² | |
| Simple supported beam without notch impact strength 8 | -30°C | ISO 179/1eU | 无断裂 | |
| 23°C | ISO 179/1eU | 无断裂 | ||
| Dart impact equipped with measuring instruments | 23°C, Total Energy | ASTM D3763 | 76.0 | J |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.