PC LEXAN™ 923 NC SABIC INNOVATIVE NANSHA
132
- Unit Price:
- $2491 USD/MT
- Packaging Specification:
- 25 KG/PKG
- Supply Quantity:
- 49.8MT
- Delivery Terms:
- FOB
- Port of Loading:
- China Main Port
- Accepted Payment Methods:
- T/T
- Shipping:
- Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 2787 3515View
serv********View
For more detailed information including pricing, customization, and shipping, please contact supplier.
Material Description
Technical Data Sheet
Material Description
- Material Properties:High rigidity Weather resistance
- Application Areas:Communication equipment
- Color:--
- Grade:Injection grade
Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Shrinkage rate | MD：3.20mm | 内部方法 | 0.50到0.70 | % |
| Water absorption rate | 24hr | ASTMD570 | 0.15 | % |
| Equilibrium,23°C | ASTMD570 | 0.35 | % | |
| Equilibrium,100°C | ASTMD570 | 0.58 | % | |
| Melt mass flow rate | 300°C/1.2kg | ASTMD1238 | 15 | g/10min |
| Specific volume | ASTMD792 | 0.835 | cm³/g | |
| Outdoor applicability | UL746C | f1 | ||
| Density/specific gravity | -- | ASTMD792 | 1.21 | g/cm³ |
| -- | ASTMD792 | 1.22 | g/cm³ |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Tensile strength 1 | Yield | ASTMD638 | 62.1 | Mpa |
| Break | ASTMD638 | 55.8 | Mpa | |
| Taber abraser | 1000Cycles,1000g,CS-17Wheel | ASTMD1044 | 10.0 | mg |
| Bending modulus 3 | 50.0mmSpan | ASTMD790 | 2240 | Mpa |
| Elongation rate 2 | Yield | ASTMD638 | 7.0 | % |
| Break | ASTMD638 | 90 | % | |
| Bending strength 4 | Yield,50.0mmSpan | ASTMD790 | 91.0 | Mpa |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Vicat softening temperature | ASTMD15256 | 152 | °C | |
| RTI | UL746 | 130 | °C | |
| thermal conductivity | ASTMC177 | 0.19 | W/m/K | |
| Linear coefficient of thermal expansion | MD：-40to95°C | ASTME831 | 6.8E-05 | cm/cm/°C |
| Hot deformation temperature | 0.45MPa,Unannealed,6.40mm | ASTMD648 | 138 | °C |
| 1.8MPa,Unannealed,6.40mm | ASTMD648 | 132 | °C | |
| RTIElec | UL746 | 130 | °C | |
| Evolution Calendar intelligent importer | UL746 | 120 | °C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Dissipation factor | 50Hz | ASTMD150 | 9E-04 | |
| 60Hz | ASTMD150 | 9E-04 | ||
| 1MHz | ASTMD150 | 0.010 | ||
| Dielectric constant | 50Hz | ASTMD150 | 3.01 | |
| 60Hz | ASTMD150 | 3.01 | ||
| 1MHz | ASTMD150 | 2.96 | ||
| Volume resistivity | ASTMD257 | >1.0E+17 | ohms·cm | |
| Dielectric strength | 3.20mm,inAir | ASTMD149 | 17 | KV/mm |
| Arc resistance 7 | ASTMD495 | PLC7 | ||
| Compared to the anti leakage trace index | CTI | UL746 | PLC3 | |
| Hot wire ignition | HWI | UL746 | PLC1 | |
| High arc combustion index | HAI | UL746 | PLC2 | |
| High voltage arc tracing rate | HVTR | UL746 | PLC3 |
| Impact performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Falling hammer impact | 23°C | ASTMD3029 | 169 | J |
| Cantilever beam without notch impact strength | 23°C | ASTMD4812 | 3200 | J/m |
| Tensile impact strength 5 | ASTMD1822 | 525 | kJ/m² | |
| Impact strength of cantilever beam gap | 23°C | ASTMD256 | 640 | J/m |
| hardness | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Rockwell hardness | R-Scale | ASTMD785 | 118 | |
| M-Scale | ASTMD785 | 70 |
| flammability | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Extreme Oxygen Index | ASTMD2863 | 35 | % | |
| UL flame retardant rating | 1.47mm | UL94 | V-0 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.