PC LEXAN™ 123R-111 SABIC EU
89
- Unit Price:
- $19811 USD/MT
- Packaging Specification:
- 25 KG/PKG
- Supply Quantity:
- 20MT
- Delivery Terms:
- FOB
- Port of Loading:
- China Main Port
- Accepted Payment Methods:
- T/T
- Shipping:
- Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 2787 3515
serv********
For more detailed information including pricing, customization, and shipping, please contact supplier.
Material Description
Technical Data Sheet
Material Description
- Material Properties:Low viscosity High temperature resistan
- Application Areas:Electronic and electrical Automotive Applications
- Color:--
- Grade:Injection grade
Technical Data Sheet
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Moisture Absorption | Saturation, 23°C | ISO 62 | 0.35 | % |
| Equilibrium, 23°C, 50% RH | ISO 62 | 0.15 | % | |
| Melt Volume flow Rate | 300°C/1.2 kg | ISO 1133 | 21.0 | cm3/10min |
| Modeling Shrinkage - Flow | 内部方法 | 0.50 到 0.70 | % | |
| Outdoor Suitability | UL 746C | f1 |
| Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Flexural Modulus | ISO 178 | 2300 | Mpa | |
| Tensile Stress | ISO 178 | 90.0 | Mpa | |
| Tensile Stress | Yield | ISO 527-2/50 | 63.0 | Mpa |
| Break | ISO 527-2/50 | 65.0 | Mpa | |
| Tensile Strain | Yield | ISO 527-2/50 | 6.0 | % |
| Break | ISO 527-2/50 | 100 | % | |
| Tensile Modulus | ISO 527-2/1 | 2350 | Mpa | |
| Taber Abrasion Resistance | 1000 Cycles, 1000 g, CS-17 Wheel | 内部方法 | 10.0 | mg |
| Thermal Properties | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Ball PressureTest | 123 to 127°C | IEC 60695-10-2 | 通过 | |
| 140°C 8 | IEC 60695-10-2 | 通过 | ||
| Vicat Softening Temperature | -- | ISO 306/B50 | 140 | °C |
| -- | ISO 306/B120 | 141 | °C | |
| Thermal Conductivity | ISO 8302 | 0.20 | W/m/K | |
| RTI | UL 746 | 130 | °C | |
| RTI Imp | UL 746 | 130 | °C | |
| RTI Elec | UL 746 | 130 | °C | |
| Coefficient of Linear Thermal Expansion (Flow) | 23 to 80°C | ISO 11359-2 | 7.0E-5 | cm/cm/°C |
| Heat Deflection Temperature | 0.45 MPa, Unannealed, 4.00 mm, 100 mm Span | ISO 75-2/Be | 133 | °C |
| 1.8 MPa, Unannealed, 4.00 mm, 100 mm Span | ISO 75-2/Ae | 122 | °C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Relative Permittivity | 50 Hz | IEC 60250 | 2.70 | |
| 60 Hz | IEC 60250 | 2.70 | ||
| 1 MHz | IEC 60250 | 2.70 | ||
| Surface Resistivity | IEC 60093 | > 1.0E+15 | ohms | |
| Volume Resistivity | IEC 60093 | > 1.0E+15 | ohms·cm | |
| Dissipation Factor? | 50 Hz | IEC 60250 | 1.0E-3 | |
| 60 Hz | IEC 60250 | 1.0E-3 | ||
| 1 MHz | IEC 60250 | 0.010 | ||
| Dielectric Strength | 3.20 mm, in Oil | IEC 60243-1 | 17 | KV/mm |
| Injection | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Drying Time | 2.0 到 4.0 | hr | ||
| Rear Temperature | 260 到 280 | °C | ||
| Middle Temperature | 270 到 290 | °C | ||
| Front Temperature | 280 到 300 | °C | ||
| Nozzle Temperature | 270 到 290 | °C | ||
| Hopper Temperature | 60 到 80 | °C | ||
| Drying Temperature | 120 | °C | ||
| Suggested Max Moisture | 0.020 | % | ||
| Processing (Melt) Temp | 280 到 300 | °C | ||
| Mold Temperature | 80 到 100 | °C |
| Impact Properties | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Charpy Unnotched Impact Strength | -30°C | ISO 179/1eU | 无断裂 | |
| 23°C | ISO 179/1eU | 无断裂 | ||
| Notched Izod Impact Strength | -30°C | ISO 180/1A | 11 | kJ/m² |
| 23°C | ISO 180/1A | 65 | kJ/m² | |
| Unnotched Izod Impact Strength | -30°C | ISO 180/1U | 无断裂 | |
| 23°C | ISO 180/1U | 无断裂 |
| hardness | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Ball Indentation Hardness | H 358/30 | ISO 2039-1 | 95.0 | Mpa |
| optical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Refractive index of light | ISO 489 | 1.586 | ||
| Haze | 2540 µm | ASTM D1003 | < 0.80 | % |
| Transmittance | 2540 µm | ASTM D1003 | 88.0 到 90.0 | % |
| Flammability | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Glow Wire Flammability Index | 1.0 mm | IEC 60695-2-12 | 850 | °C |
| Oxygen Index | ISO 4589-2 | 25 | % | |
| Flame Rating | 0.75 mm | UL 94 | HB | |
| 3.0 mm | UL 94 | HB |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.