Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Density | | ASTM D792/ISO 1183 | 1.41 | |
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Strength | -- | ISO-527-1,2 | 68 | Mpa |
Flexural Modulus | -- | ISO-178 | 2650 | Mpa |
Flexural Strength | -- | ISO-178 | 92 | Mpa |
Surface Resistivity | -- | IEC-60093 | 1×10 | Ω |
Fracture strain | -- | ISO-527-1,2 | 35 | % |
Charpy Notched Impact Strength | -- | ISO-179/1eA | 11 | KJ/m |
Heat Deflection Temperature | -- | ISO-75-1,2 | 95 | °C |
Coefficient of Linear Thermal Expansion (Across Flow) | -- | ISO-11359-2 | 12 | X10 |
Volume Resistivity | -- | IEC-60093 | 1×10 | Ω*cm |
决缘破坏强度(3mmt) | -- | IEC-60243-1 | 19 | KV/mm |
Coefficient of Linear Thermal Expansion (Flow) | -- | ISO-11359-2 | 13 | X10 |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Elongation?(Break) | | ASTM D638/ISO 527 | 35 | % |
Tensile Strength | | ASTM D638/ISO 527 | 68 | kg/cm²(MPa)[Lb/in²] |
Flexural Modulus | | ASTM D790/ISO 178 | 2650 | kg/cm²(MPa)[Lb/in²] |
Flexural Strength | | ASTM D790/ISO 178 | 92 | kg/cm²(MPa)[Lb/in²] |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Linear expansion coefficient | | ASTM D696/ISO 11359 | 13 | mm/mm.℃ |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|
Surface Resistivity | | ASTM D257/IEC 60093 | 1×10 | Ω |
Volume Resistivity | | ASTM D257/IEC 60093 | 1×10 | Ω.cm |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.