Technical Data Sheet
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Moisture Absorption | 23C/50RH | ISO 62 | 0.2 | % |
| Density / Specific Gravity | | ISO 1183 | 1.37 | g/cm |
| Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile Modulus | 73℉ | ISO 527-1,-2 | 290000 | psi |
| Tensile Stress(Yield) | 73℉ | ISO 527-1,-2 | 7250 | psi |
| Tensile Strain(Yield) | 73℉ | ISO 527-1,-2 | 12 | % |
| Tensile Creep Modulus | 1000h | ISO 899-1 | 152000 | psi |
| Charpy Notched Impact Strength | -22℉ | ISO 179 | 3.09 | ft·lb/in |
| Charpy Notched Impact Strength | 73℉ | ISO 179 | 5.23 | ft·lb/in |
| Charpy Unnotched Impact Strength | -22℉ | ISO 179 | 109 | ft·lb/in |
| Charpy Unnotched Impact Strength | 73℉ | ISO 179/1eA | No Break | ft·lb/in |
| Thermal Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Deflection Temperature Under Load? | 1.80MPa | ISO 75A-1,-2 | 185 | ℉ |
| Flame retardancy | | UL94 | HB | |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Dielectric Constant | 1E+6HZ，73℉ | IEC 60250 | 4.00 | |
| Volume Resistivity | | IEC 60093 | 1E+14 | ohm·cm |
| Surface Resistivity | | IEC 60093 | 1E+14 | ohms |
| Processing | Test Condition | Test Method | Test Result | Unit |
|---|
| Mold Temperature | | | 140-176 | ℉ |
| Processing temperature | | | 374-419 | ℉ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
