Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Melt Mass-Flow Rate | 190°C/2.16 kg | ISO 1133 | 3.0 | g/10 min |
Melt Volume flow Rate | 190°C/2.16 kg | ISO 1133 | 2.40 | cm3/10min |
Density | | ISO 1183 | 1.45 | g/cm³ |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Modulus | | ISO 527-2 | 11700 | Mpa |
Flexural Modulus | | ISO 178 | 10000 | Mpa |
Tensile Stress | | ISO 527-2 | 130 | Mpa |
Tensile Strain | Break | ISO 527-2 | 1.5 | % |
Flexural Stress | | ISO 178 | 185 | Mpa |
Coefficient of Friction | Dynamic 2 | JIS K7218 | 0.37 | |
Coefficient of Friction | 与钢 - 动态 3 | JIS K7218 | 0.27 | |
Specific Wear Rate | 0.49 MPa, 0.30 m/sec 4 | JIS K7218 | 10 | 10^-8 mm³/N·m |
Specific Wear Rate | 0.060 MPa, 0.15 m/sec 5 | JIS K7218 | 200 | 10^-8 mm³/N·m |
Specific Wear Rate | 0.49 MPa, 0.30 m/sec 6 | JIS K7218 | 500 | 10^-8 mm³/N·m |
Specific Wear Rate | 0.060 MPa, 0.15 m/sec 7 | JIS K7218 | 10000 | 10^-8 mm³/N·m |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Linear thermal expansion coefficient | Flow : 23 to 55°C | 内部方法 | 1.0E-5 | cm/cm/°C |
Linear thermal expansion coefficient | Across Flow : 23 to 55°C | 内部方法 | 9.0E-5 | cm/cm/°C |
Deflection Temperature Under Load? | 1.8 MPa, Unannealed | ISO 75-2/A | 163 | °C |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|
Surface Resistivity | | IEC 60093 | 3.0E+2 | ohms |
Volume Resistivity | | IEC 60093 | 1.0E+3 | ohms·cm |
Color Number | | | CD3501 | |
Injection | Test Condition | Test Method | Test Result | Unit |
---|
Drying Time | | | 3.0 到 4.0 | hr |
Screw Speed | | | 100 到 150 | rpm |
Injection Pressure | | | 50.0 到 100 | Mpa |
Injection Velocity | | | 0 到 3 | m/min |
Drying Temperature | | | 80 到 90 | °C |
Processing (Melt) Temp | | | 190 到 210 | °C |
Mold Temperature | | | 60 到 80 | °C |
Impact Properties | Test Condition | Test Method | Test Result | Unit |
---|
Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 4.5 | kJ/m² |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.