Technical Data Sheet
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Modeling Shrinkage | MD：3.00mm | ASTMD955 | 1.8到2.2 | % |
| Moisture Absorption | Equilibrium,23°C,69%RH | ASTMD570 | 0.22 | % |
| Melt Mass-Flow Rate | 190°C/2.16kg | ASTMD1238 | 27 | g/10min |
| Density / Specific Gravity | | ASTMD792 | 1.41 | g/cm³ |
| Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile Strength | Yield | ASTMD638 | 60.8 | Mpa |
| Compressive Strength | 1%Strain | ASTMD695 | 31.4 | Mpa |
| Compressive Strength | 10%Strain | ASTMD695 | 108 | Mpa |
| Tensile Elongation | Break | ASTMD638 | 45 | % |
| Flexural Modulus | | ASTMD790 | 2550 | Mpa |
| Flexural Strength | | ASTMD790 | 93.2 | Mpa |
| Thermal Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Deflection Temperature Under Load? | 0.45MPa,Unannealed | ASTMD648 | 158 | °C |
| Deflection Temperature Under Load? | 1.8MPa,Unannealed | ASTMD648 | 110 | °C |
| Linear thermal expansion coefficient | MD | ASTMD696 | 8.5E-05 | cm/cm/°C |
| Melting temperature | | DSC | 165 | °C |
| Vicat Softening Temperature | | ASTMD1525 | 162 | °C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Surface Resistivity | | ASTMD257 | 1E+16 | ohms |
| Volume Resistivity | 23°C | ASTMD257 | 1E+14 | ohms·cm |
| Dielectric Strength | 2.00mm | ASTMD149 | 24 | KV/mm |
| Dielectric Constant | 50Hz | IEC60250 | 3.80 | |
| Dielectric Constant | 1kHz | IEC60250 | 3.80 | |
| Dielectric Constant | 1MHz | IEC60250 | 3.80 | |
| Impact Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Notched Izod Impact Strength | 23°C | ASTMD256 | 53 | J/m |
| hardness | Test Condition | Test Method | Test Result | Unit |
|---|
| Rockwell Hardness | M-Scale | ASTMD785 | 80 | |
| Flammability | Test Condition | Test Method | Test Result | Unit |
|---|
| UL flame retardant rating | | UL94 | HB | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
