Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Density | | ASTM D792/ISO 1183 | 1.41 | |
Modeling Shrinkage | | ASTM D955 | 1.6-2.0 | % |
Moisture Absorption 23℃/24H | | ASTM D570/ISO 62 | 0.2 | % |
Melt Mass-Flow Rate | | ASTM D1238/ISO 1133 | 70 | g/10min |
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Modeling Shrinkage | Flow | % | ASTM D955,ISO 294-4 | 1.6-2 |
Modeling Shrinkage | Across Flow | % | ISO 294-4 | 1.6-2 |
Rockwell Hardness | M-Scale | | ASTM D785 | |
Rockwell Hardness | R-Scale | | ASTM D785 | 115 |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Taber Abrasion Resistance | 1000 Cycles | mg | ASTM D1044 | |
Notched Izod Impact Strength | | J/m | ASTM D256 | 39 |
Charpy Notched Impact Strength | 23℃ | KJ/m | ISO 179/1eA | |
Tensile Stress | | MPa | ASTM D638 | 61 |
Tensile Stress(Yield) | | MPa | ISO 527-2 | 67 |
Tensile Modulus | | MPa | ISO 527-2 | 2900 |
Tensile Strength | | ASTM D638/ISO 527 | 61 | kg/cm²(MPa)[Lb/in²] |
Tensile Elongation | | ASTM D638/ISO 527 | 40 | % |
Tensile Elongation | Break | % | ASTM D638 | 45 |
Tensile Elongation | Break | % | ISO 527-2 | |
Flexural Modulus | | ASTM D790/ISO 178 | 2630 | kg/cm²(MPa)[Lb/in²] |
Flexural Modulus | | MPa | ASTM D790 | 2630 |
Flexural Strength | | MPa | ASTM D790 | |
Flexural Strength | | ASTM D790/ISO 178 | 90 | kg/cm²(MPa)[Lb/in²] |
Izod notch impact strength | | ASTM D256/ISO 179 | 39 | kg·cm/cm(J/M)ft·lb/in |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Coefficient of Linear Thermal Expansion (Flow) | | cm/cm/℃ | ASTM E831 | 0.0001 |
Deflection Temperature Under Load? | 0.45MPa,unannealed | ℃ | ASTM D648 | 158 |
Deflection Temperature Under Load? | 0.45MPa,unannealed | ℃ | ISO 75-2/B | 156 |
Deflection Temperature Under Load? | 1.8MPa,unannealed | ℃ | ASTM D648 | |
Deflection Temperature Under Load? | 1.8MPa,unannealed | ℃ | ISO 75-2/A | 105 |
Deflection Temperature Under Load? | | ASTM D648/ISO 75 | 110 | ℃(℉) |
Flame Rating | | | UL 94 | HB |
Physical | Test Condition | Test Method | Test Result | Unit |
---|
Moisture Absorption | 24 hr | % | ASTM D570 | 0.2 |
Melt index | | g/10min | ASTM D1238 | 45 |
Melt index | 190℃/2.16kg | g/10min | ISO 1133 | 45 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.