PA66 Zytel® 70G43L NC010 DUPONT SHENZHEN
76
- Unit Price:
- $3887 USD/MT
- Packaging Specification:
- 25KG/PKG
- Supply Quantity:
- 63MT
- Delivery Terms:
- FOB
- Port of Loading:
- China Main Port
- Accepted Payment Methods:
- T/T
- Shipping:
- Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
serv********
For more detailed information including pricing, customization, and shipping, please contact supplier.
Technical Data Sheet
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Modeling Shrinkage | Across Flow | ISO 294-4 | 1.0 | % |
| 流量 | ISO 294-4 | 0.30 | % | |
| Moisture Absorption | 24 hr, 23°C, 2.00 mm | ISO 62 | 0.90 | % |
| Saturation, 23°C, 2.00 mm | ISO 62 | 4.7 | % | |
| Equilibrium, 23°C, 2.00 mm, 50% RH | ISO 62 | 1.5 | % |
| Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Tensile Stress | Break | ISO 527-2 | 225 | Mpa |
| Tensile Strain | Break | ISO 527-2 | 3.0 | % |
| Tensile Creep Modulus | 1 hr | ISO 899-1 | -- | Mpa |
| 1000 hr | ISO 899-1 | -- | Mpa | |
| Tensile Modulus | ISO 527-2 | 14000 | Mpa | |
| Flexural Modulus | ISO 178 | 12000 | Mpa | |
| Flexural Stress | ISO 178 | 340 | Mpa |
| Thermal Properties | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Deflection Temperature Under Load? | 0.45 MPa, Unannealed | ISO 75-2/B | 262 | °C |
| 1.8 MPa, Unannealed | ISO 75-2/A | 255 | °C | |
| Linear thermal expansion coefficient | Flow | ISO 11359-2 | 1.5E-5 | cm/cm/°C |
| Flow : -40 to 23°C | ISO 11359-2 | 2.0E-5 | cm/cm/°C | |
| Flow : 55 to 160°C | ISO 11359-2 | 9.0E-6 | cm/cm/°C | |
| Across Flow | ISO 11359-2 | 7.9E-5 | cm/cm/°C | |
| Across Flow : -40 to 23°C | ISO 11359-2 | 6.1E-5 | cm/cm/°C | |
| Across Flow : 55 to 160°C | ISO 11359-2 | 1.3E-4 | cm/cm/°C | |
| Glass Transition Temperature | ISO 11357-2 | 80.0 | °C | |
| Melting Temperature | ISO 11357-3 | 262 | °C | |
| Vicat Softening Temperature | ISO 306/B50 | 255 | °C | |
| Effective Thermal Diffusivity | 9.50E-8 | m²/s |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Dissipation Factor? | 100 Hz | IEC 62631-2-1 | 0.010 | |
| 1 MHz | IEC 62631-2-1 | 0.015 | ||
| Surface Resistivity | IEC 62631-3-2 | -- | ohms | |
| Volume Resistivity | IEC 62631-3-1 | > 1.0E+13 | ohms·m | |
| Dielectric Strength | IEC 60243-1 | 27 | KV/mm | |
| Relative Permittivity | 1 MHz | IEC 62631-2-1 | 4.10 | |
| 100 Hz | IEC 62631-2-1 | 4.50 |
| Fill Analysis | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Melt Density | 1.29 | g/cm³ | ||
| Ejection Temperature | 210 | °C | ||
| Specific Heat Capacity of Melt | 2050 | J/kg/°C | ||
| Thermal Conductivity of Melt | 0.25 | W/m/K |
| Injection | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Drying Temperature | 80 | °C | ||
| Drying time - Hot air dryer | 2.0 到 4.0 | hr | ||
| Suggested Max Moisture | 0.20 | % | ||
| Processing (Melt) Temp | 285 到 305 | °C | ||
| Melt Temperature, Optimum | 295 | °C | ||
| Mold Temperature | 70 到 120 | °C | ||
| Mold Temperature, Optimum | 100 | °C | ||
| Holding Pressure | 50.0 到 100 | Mpa | ||
| Drying Recommended | yes | |||
| Hold Pressure Time | 3.00 | s/mm | ||
| Maximum Screw Tangential Speed | 12 | m/min |
| Impact Properties | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Notched Izod impact strength | -30°C | ISO 180/1U | 110 | kJ/m² |
| 23°C | ISO 180/1U | 110 | kJ/m² | |
| Charpy Unnotched Impact Strength | -30°C | ISO 179/1eU | 85 | kJ/m² |
| 23°C | ISO 179/1eU | 100 | kJ/m² |
| hardness | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Rockwell Hardness | M -Sale | ISO 2039-2 | 105 | |
| R -Sale | ISO 2039-2 | 125 |
| Flammability | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Oxygen Index | ISO 4589-2 | 23 | % | |
| Burning Rate | 1.00 mm | ISO 3795 | 27 | mm/min |
| Flame Rating | 0.71 mm | UL 94, IEC 60695-11-10, -20 | HB | |
| 1.5 mm | UL 94, IEC 60695-11-10, -20 | HB | ||
| FMVSS Flammability | FMVSS 302 | B |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Other Prices
| Port of Loading | Unit Price |
|---|---|
| Huangpu port, China | 7192 USD/MT |