Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Modeling Shrinkage | TD | ISO294-4 | 1.1 | % |
Modeling Shrinkage | MD | ISO294-4 | 0.34 | % |
Melt Volume flow Rate | 275°C/5.0kg | ISO1133 | 25.0 | cm3/10min |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Stress | Break,23°C | ISO527-2 | 160 | Mpa |
Tensile Strain | Break,23°C | ISO527-2 | 3.0 | % |
Tensile Elongation?(Break) | | ASTM D638/ISO 527 | 160/120 | % |
Tensile Modulus | | ASTM D638/ISO 527 | 9200 | kg/cm²(MPa)[Lb/in²] |
Tensile Modulus | 23°C | ISO527-2 | 11000 | Mpa |
Tensile Strength | | ASTM D638/ISO 527 | 160/120 | kg/cm²(MPa)[Lb/in²] |
Tensile Elongation | | ASTM D638/ISO 527 | 3/4 | % |
Flexural Modulus | 23°C | ISO178 | 9200 | Mpa |
Charpy impact strength | | ASTM D256/ISO 179 | 14/18 | kg·cm/cm(J/M)ft·lb/in |
Charpy impact strength | | ASTM D256/ISO 179 | 70/70 | kg·cm/cm(J/M)ft·lb/in |
Tensile Elongation?(Break) | | ASTM D638/ISO 527 | 3/4 | % |
Izod notch impact strength | | ASTM D256/ISO 179 | 13/20 | kg·cm/cm(J/M)ft·lb/in |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
RTIElec | 0.40mm | UL746 | 110 | °C |
RTIElec | 0.75mm | UL746 | 115 | °C |
RTIElec | 1.5mm | UL746 | 115 | °C |
RTIElec | 3.0mm | UL746 | 115 | °C |
Evolution Calendar intelligent importer | 0.40mm | UL746 | 115 | °C |
Evolution Calendar intelligent importer | 0.75mm | UL746 | 115 | °C |
Evolution Calendar intelligent importer | 1.5mm | UL746 | 115 | °C |
Evolution Calendar intelligent importer | 3.0mm | UL746 | 115 | °C |
RTIStr | 0.75mm | UL746 | 130 | °C |
RTIStr | 1.5mm | UL746 | 130 | °C |
RTIStr | 3.0mm | UL746 | 130 | °C |
Linear thermal expansion coefficient | MD | | 1.7E-05 | cm/cm/°C |
Linear thermal expansion coefficient | TD | | 6.5E-05 | cm/cm/°C |
Deflection Temperature Under Load? | | ASTM D648/ISO 75 | 250 | ℃(℉) |
Melting Temperature | | | 220 | ℃(℉) |
Linear expansion coefficient | | ASTM D696/ISO 11359 | 1.5-2/6-7 | mm/mm.℃ |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|
Surface Resistivity | | ASTM D257/IEC 60093 | >1013/1010 | Ω |
Dielectric Constant | | ASTM D150/IEC 60250 | 3.6/5 | |
Volume Resistivity | | ASTM D257/IEC 60093 | 1015/1012 | Ω.cm |
Impact Properties | Test Condition | Test Method | Test Result | Unit |
---|
Charpy Unnotched Impact Strength | -30°C | ISO179 | 65 | kJ/m² |
Charpy Unnotched Impact Strength | 23°C | ISO179 | 70 | kJ/m² |
Flammability | Test Condition | Test Method | Test Result | Unit |
---|
UL flame retardant rating | 0.75mm | UL94 | V-0 | |
UL flame retardant rating | 1.5mm | UL94 | V-0 | |
UL flame retardant rating | 3.0mm | UL94 | V-0 | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.