Technical Data Sheet
| Physical properties | Test Condition | Test Method | Test Result | Unit |
|---|
| density | | ASTM D792/ISO 1183 | 1.18 | |
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|
| Flame resistant grade | | UL 94 | 113 | |
| Shrinkage rate | MD：1.00mm3 | % | 0.60到0.90 | |
| Shrinkage rate | MD：3.00mm4 | % | 1.0到1.6 | |
| Water absorption rate | 23°C,24hr | % | 1.1 | -- |
| Water absorption rate | Saturation,23°C | % | 7.5 | -- |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile stress | 23°C | MPa | 85.0 | 65.0 |
| Tensile stress | 80°C | MPa | 45.0 | -- |
| Tensile strain | Break,23°C | % | 7.5 | 7.5 |
| Bending modulus | 23°C | MPa | 3500 | 1500 |
| Bending modulus | 80°C | MPa | 1200 | -- |
| Bending stress | -40°C | MPa | 170 | -- |
| Bending stress | 23°C | MPa | 125 | 70.0 |
| Bending stress | 80°C | MPa | 65.0 | -- |
| Tensile and flexural strength | 23°C | ASTM D-638 | 850 | kg/cm |
| Tensile fracture strength | 23°C | ASTM D-638 | 12 | kg/cm |
| Taber abraser | 1000Cycles | mg | 9.00到10.0 | -- |
| Flexural strength | -40°C | ASTM D-790 | 1210 | kg/cm |
| Flexural modulus | -40°C | ASTM D-790 | 34500 | kg/cm |
| Ezo De Wei Sheng | Unnotched1/2" 23°C | | 5 | kg.cm/cm |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Melting temperature | | °C | 265 | -- |
| heat deflection temperature | 4.6kg/cm | ASTM D-648 | 244 | °C |
| Hot deformation temperature | 0.45MPa,Unannealed | °C | 244 | -- |
| melting point | | | 265 | ℃（℉） |
| melting point | | 差示扫描测热计DSC法 | 265 | °C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Arc resistance | 1/8" | ASTM D-150 | 127 | |
| Dielectric constant 5 | 23°C,50Hz | | 5.20 | -- |
| Dissipation factor 5 | 23°C,50Hz | | 0.070 | -- |
| Arc resistance 6 | | sec | 127 | -- |
| IEC conductivity trace index | 导热率温度指表 | UL 746 | 600 | V |
| Compared to the anti leakage trace index | CTI | V | 600 | -- |
| Volume resistivity | | ASTM D-257 | V-0 | Ω.cm |
| Volume resistivity | | ohms·cm | 1E+15 | -- |
| Dielectric strength | 1/8" 短时间 | ASTM D-149 | 17 | KV/mm |
| Dielectric strength | | kV/mm | 28 | -- |
| Impact performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Impact strength of simply supported beam without notch | -40°C | kJ/m² | 140 | 无断裂 |
| hardness | Test Condition | Test Method | Test Result | Unit |
|---|
| Rockwell hardness | R-Sale,23°C | | 120 | -- |
| flammability | Test Condition | Test Method | Test Result | Unit |
|---|
| UL flame retardant rating | 0.40mm | | V-0 | -- |
| Basic performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Water absorption rate | （24hr）23°C | ASTM D-570 | 1.1 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
