Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Modeling Shrinkage | MD2.0mm | ISO294-4 | 0.19 | % |
Modeling Shrinkage | TD2.0mm | ISO294-4 | 0.60 | % |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Elongation?(Break) | 23°C | ISO527-2 | 2.70 | % |
Tensile Modulus | 23°C | ISO527-2 | 16200 | Mpa |
Tensile Strength | 23°C | ISO527-2 | 215 | Mpa |
Flexural Modulus | 23°C | ISO178 | 15000 | Mpa |
Flexural Strength | 23°C | ISO178 | 340 | Mpa |
Charpy Unnotched Impact Strength | 23°C | ISO179/1eU | 100 | kJ/m² |
Charpy Unnotched Impact Strength | -30°C | ISO179/1eU | 95 | kJ/m² |
Unnotched Izod Impact Strength | 23°C | ISO180/1U | 85 | kJ/m² |
Unnotched Izod Impact Strength | -30°C | ISO180/1U | 85 | kJ/m² |
Notched Izod Impact Strength | 23°C | ISO180/1A | 17 | kJ/m² |
Notched Izod Impact Strength | -30°C | ISO180/1A | 15 | kJ/m² |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Vicat Softening Temperature | Melting Temperature | ISO11357-3 | 222 | °C |
Deflection Temperature Under Load? | 0.45MPaUnannealed | ISO75-2/Bf | 220 | °C |
Deflection Temperature Under Load? | 1.80MPaAnnealed | ISO75-2/Af | 210 | °C |
Coefficient of Linear Thermal Expansion | MD | ISO11359-2 | 1.2E-05 | cm/cm/°C |
Coefficient of Linear Thermal Expansion | TD | ISO11359-2 | 9E-05 | cm/cm/°C |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|
Insulation strength | 1.00mm | IEC60243-1 | 35 | KV/mm |
Volume Resistivity | | IEC60093 | 7E+14 | Ω.cm |
Dissipation Factor? | 23°C | IEC60250 | 0.014 | 100HZ |
Dissipation Factor? | 23°C | IEC60250 | 0.017 | 1MHz |
Dissipation Factor? | 相对漏电起痕指数 | IEC60112 | 400 | V |
Dielectric Constant | 23°C | IEC60250 | 4.70 | 100HZ |
Dielectric Constant | 23°C | IEC60250 | 4.20 | 1MHz |
hardness | Test Condition | Test Method | Test Result | Unit |
---|
Ball Indentation Hardness | | ISO2039-1 | 232 | Mpa |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.