Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Modeling Shrinkage | | | 1.3 | % |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Notched Impact Strength | | ASTM D-256 | 10.2 | kJ/m² |
Rockwell Hardness | | ASTM D-785 | 15.2 | Kgf/mm2 |
Tensile Modulus | | ASTM D-638 | 2528.5 | Mpa |
Tensile Strength | | ASTM D-638 | 73.3 | Mpa |
Tensile Elongation | Break | ASTM D-638 | 32.5 | % |
Flexural Modulus | | ASTM D-790 | 2203.9 | Mpa |
Flexural Strength | | ASTM D-790 | 113.1 | Mpa |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Deflection Temperature Under Load? | 1.82MPa | ASTM D-648 | 53 | °C |
Flammability Properties | | UL 94 | V2 | |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|
Dissipation Factor (Tangent) | | ASTM D-150 | 0.028 | MHz |
Dielectric Constant | | ASTM D-150 | 3.3 | MHz |
Other | Test Condition | Test Method | Test Result | Unit |
---|
monomer Content | | QB/44072JW010-91 | ≤0.5 | % |
Moisture Content | | QB/44072LW010-91 | ≤0.05 | % |
Physical | Test Condition | Test Method | Test Result | Unit |
---|
Relative Viscosity | | GB T1632-93 | 2.50 | |
Density | | GB 1033-86 | 1.14 | g/cm³ |
Melt index | | ASTM D-1238 | 26.4 | g/10min |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.