Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Density | | ASTM D792/ISO 1183 | 1.2 | |
Modeling Shrinkage | | ASTM D955 | 0.7~1.3 | % |
Melt Mass-Flow Rate | | ASTM D1238/ISO 1133 | 10 | g/10min |
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Modeling Shrinkage | | ASTM | 2.0-2.4 | % |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Notched Impact Strength | | ASTM D-256 | 8 | Kg./cm/cm |
Flexural Strength | | ASTM D-790 | 13000 | kg/cm2 |
Tensile Strength | | ASTM D-638 | 320 | kg/cm2 |
Flexural Modulus | | ASTM D790/ISO 178 | 28000 | kg/cm²(MPa)[Lb/in²] |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Burning Rate | | UL94 | V-0 | |
Deflection Temperature Under Load? | | ASTM D648/ISO 75 | 135 | ℃(℉) |
Deflection Temperature Under Load? | | ASTM D-648 | 105 | °C |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|
Insulation failure strength | | ASTM D-149 | 40 | KV/mm |
Physical | Test Condition | Test Method | Test Result | Unit |
---|
Melt index | | ASTM D-1238 | 10 | g/10min |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.