Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Modeling Shrinkage | MD | ASTMD955 | 0.55 | % |
Modeling Shrinkage | | ISO294-4 | 0.40to0.70 | % |
Moisture Absorption | Equilibrium,23°C,50%RH | ISO62 | 0.25 | % |
Moisture Absorption | | ASTM D570 | 0.3 | % |
Melt Mass-Flow Rate | 220°C/10.0kg | ASTMD1238 | 7.0 | g/10min |
Melt Volume flow Rate | 220°C/10.0kg | ISO1133 | 7.00 | cm3/10min |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Elongation (Break) | | ISO 527-2 | 3.0 | % |
Ball Indentation Hardness | | ISO2039-1 | 102 | Mpa |
Vicat Softening Temperature | | ISO 306 | 103 | °C |
Tensile Strength(Break) | | ISO 527-2 | 390 | kg/cm |
Tensile Strength(Yield) | | ISO 527-2 | 520 | kg/cm |
Nominal Tensile Strain at Break | 23°C | ISO527-2 | 9.0 | % |
Tensile Strength | Yield,23°C | ASTMD638 | 52.0 | Mpa |
Flexural Stress | | ISO178 | 72.0 | Mpa |
Tensile Stress | Yield,23°C | ISO527-2 | 51.0 | Mpa |
Tensile Strain | Yield,23°C | ISO527-2 | 3.0 | % |
Tensile Modulus | | ISO 527-2 | 25000 | kg/cm |
Tensile Modulus | | ASTMD638 | 2500 | Mpa |
Tensile Modulus | | ISO527-2 | 2400 | Mpa |
Tensile Elongation | Break | ISO 527-2 | 25 | % |
Tensile Elongation | Break | ASTMD638 | 3.0 | % |
Rockwell Hardness | | | 110 | R |
Flexural Modulus | | ISO 178 | 24000 | kg/cm |
Flexural Modulus | | ASTMD790 | 2400 | Mpa |
Flexural Modulus | | ISO178 | 2400 | Mpa |
Flexural Strength | | ASTMD790 | 77.2 | Mpa |
Flexural Strength | | ISO 178 | 770 | kg/cm |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Linear thermal expansion coefficient | MD | ISO11359-2 | 9E-05 | cm/cm/°C |
Vicat Softening Temperature | -- | ISO306/A50 | 115 | °C |
Vicat Softening Temperature | -- | ISO306/B50 | 106 | °C |
Heat Deflection Temperature | 0.45MPa,Annealed | ISO75-2/B | 107 | °C |
Heat Deflection Temperature | 1.8MPa,Annealed | ISO75-2/A | 99.0 | °C |
Maximum Service Temperature | | | 85 | °C |
Thermal Conductivity | | DIN52612 | 0.17 | W/m/K |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|
Electric strength | 1.50mm | IEC60243-1 | 39 | KV/mm |
Comparative Tracking Index | | IEC60112 | 600 | V |
Volume Resistivity | | ASTMD257 | >1.0E+15 | ohms·cm |
Volume Resistivity | | IEC60093 | 1E+15 | ohms·cm |
Impact Properties | Test Condition | Test Method | Test Result | Unit |
---|
Charpy Unnotched Impact Strength | -30°C | ISO179 | 100 | kJ/m² |
Charpy Unnotched Impact Strength | 23°C | ISO179 | 190 | kJ/m² |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.