Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Moisture Absorption | Saturation | ASTM D570 | < 0.30 | % |
Moisture Absorption | (23°C,24hr) | ASTMD570 | <0.30 | % |
Melt Mass-Flow Rate | 200℃/5.0 kg | ASTM D1238 | 1.8 | g/10 min |
Melt Mass-Flow Rate | 220℃/10.0 kg | ASTM D1238 | 20 | g/10 min |
Modeling Shrinkage | MD | ASTMD995 | <0.40 | % |
Modeling Shrinkage | MD | ASTM D955 | < 0.40 | % |
Melt Mass-Flow Rate | 200℃/5.0Kg | ASTMD1238 | 1.8 | g/10min |
Melt Mass-Flow Rate | 220℃/10.0Kg | ASTMD1238 | 20 | g/10min |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Strength | Yield, 23℃, 3.18 mm | ASTM D638 | 44.1 | Mpa |
Tensile Strength | Break, 23℃, 3.18 mm | ASTM D638 | 37.3 | Mpa |
Notched Izod Impact Strength | 23°C | ASTMD256 | 220 | J/m |
Notched Izod Impact Strength | 23℃, 3.18 mm | ASTM D256 | 200 | J/m |
Notched Izod Impact Strength | 23℃, 6.35 mm | ASTM D256 | 180 | J/m |
Tensile Elongation?(Break) | 23°C | ASTMD638 | 30 | % |
Tensile Strength | 23°C | ASTMD638 | 44 | Mpa |
Tensile Elongation | Break, 23℃, 3.18 mm | ASTM D638 | 30 | % |
Rockwell Hardness | R-Scale, 23℃ | ASTM D785 | 115 | |
Flexural Modulus | 23°C | ASTMD790 | 2550 | Mpa |
Flexural Modulus | 23℃ | ASTM D790 | 27000 | Mpa |
Flexural Strength | 23°C | ASTMD790 | 76 | Mpa |
Flexural Strength | Yield, 23℃ | ASTM D790 | 77.5 | Mpa |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Deflection Temperature Under Load? | 1.8 MPa, Annealed, 12.7 mm | ASTM D648 | 85 | °C |
Deflection Temperature Under Load? | 1.80MPaUnannealed | ASTMD648 | 85 | °C |
Vicat Softening Temperature | | ASTM D1525 | 103 | °C |
Vicat Softening Temperature | | ASTM1525 | 103 | °C |
Flame Rating | 1.59 mm | UL 94 | HB | |
High Amp Arc Ignition | 1.57 mm | UL 746 | 200 | |
High Voltage Arc Tracking Rate | 1.57 mm | UL 746 | 0.00 | mm/min |
Hot-wire Ignition | 1.57 mm | UL 746 | 18 | sec |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|
Insulation strength | | ASTMD149 | 22 | KV/mm |
Volume Resistivity | | ASTMD257 | 1E+22 | Ω.cm |
hardness | Test Condition | Test Method | Test Result | Unit |
---|
Rockwell Hardness | | ASTMD785 | 115 | R |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.