Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Modeling Shrinkage | flow,0.125" | ASTM D-955 | 4-6 | in/inE-3 |
Solid Content | | ASTM D-792 | 1.05 | |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Bending yield strength | 0.05in/min,2"span | ASTM D-790 | 10600 | psi |
Tensile Elongation?(Yield) | 类型1,0.2in/min | ASTM D-638 | 2.2 | % |
Tensile Modulus | 0.2in/min | ASTM D-638 | 345000 | psi |
Flexural Modulus | 0.05in/min,2"span | ASTM D-790 | 355000 | psi |
Tensile Strength(Yield) | 类型1,0.2in/min | ASTM D-638 | 6150 | psi |
Tensile Elongation?(Break) | 类型1,0.2in/min | ASTM D-638 | 30.0 | % |
Tensile Strength(Break) | 类型1,0.2in/min | ASTM D-638 | 4900 | psi |
IZOD Notch Impact Strength | 73F | ASTM D-256 | 6.5 | ft-lb/in |
Instrumented Dart Impact | 73F | ASTM D-3763 | 304 | in-lbs |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Temperature Index | 电性能 | UL 746B | 60 | deg C |
Temperature Index | 机械冲击性能 | UL 746B | 60 | deg C |
Temperature Index | 非机械冲击性能 | UL 746B | 60 | deg C |
Deflection Temperature Under Load? | 264PSi, 0.250",Unannealed | ASTM D-648 | 185 | deg F |
Deflection Temperature Under Load? | 66PSi, 0.125",Unannealed | ASTM D-648 | 210 | deg F |
Vicat Softening Temperature | | ASTM D-1525 | 214 | deg F |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|
CTE | xflow,-40Fto100F | ASTM E-831 | 4.1E-05 | 1/F |
CTE | flow,-40Fto100F | ASTM E-831 | 4.3E-05 | 1/F |
Other | Test Condition | Test Method | Test Result | Unit |
---|
UL file No | | | E121562 | |
High Voltage Arc Tracking Rate | | UL 746A | 3 | PLC Code |
额定HB值 | 测试厚度 | UL 94 | 0.060 | inch |
Comparative Tracking Index | | UL 746A | 1 | PLC Code |
Glow Wire Flammability Index | | UL 746A | 3 | PLC Code |
Arc Resistance | | ASTM D-495 | 6 | PLC Code |
High Amp Arc Ignition | | UL 746A | 3 | PLC Code |
Physical | Test Condition | Test Method | Test Result | Unit |
---|
Melt Viscosity | 240℃,1000sec-1 | ASTM D-3825 | 2550 | poise |
Melt index | 230℃,3.8kg | ASTM D-1238 | 4.4 | g/10min |
Melt index | 220℃,10kg | ISO 1133 | 16 | g/10min |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.