ABS Terluran® GP-22 INEOS STYRO KOREA
169
- Unit Price:
- $1731 USD/MT
- Packaging Specification:
- 25 KG/PKG
- Supply Quantity:
- 67MT
- Delivery Terms:
- FOB
- Port of Loading:
- China Main Port
- Accepted Payment Methods:
- T/T
- Shipping:
- Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 2787 3515View
serv********View
For more detailed information including pricing, customization, and shipping, please contact supplier.
Material Description
Technical Data Sheet
Material Description
- Material Properties:High mobility
- Application Areas:Electronic communication small home appliances
- Color:--
- Grade:Injection grade
Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Shrinkage rate | MD | ASTMD955 | 0.40to0.70 | % |
| ISO294-4 | 0.40to0.70 | % | ||
| Water absorption rate | Saturation,23°C | ASTMD570 | 1.0 | % |
| Saturation,23°C | ISO62 | 1.0 | % | |
| Equilibrium,23°C,50%RH | ISO62 | 0.22 | % | |
| Melt mass flow rate | 200°C/5.0kg | ASTMD1238 | 1.5 | g/10min |
| 220°C/10.0kg | ASTMD1238 | 19 | g/10min | |
| Melt volume flow rate | 230°C/3.8kg | ASTMD1238 | 4.80 | cm3/10min |
| 220°C/10.0kg | ISO1133 | 19.0 | cm3/10min | |
| Density/specific gravity | ASTMD792 | 1.04 | g/cm³ | |
| ISO1183 | 1.04 | g/cm³ |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Nominal tensile fracture strain | 23°C | ISO527-2 | 10 | % |
| Bending stress | ISO178 | 65.0 | Mpa | |
| Tensile strength | Yield,23°C | ASTMD638 | 45.0 | Mpa |
| Tensile stress | Yield,23°C | ISO527-2 | 45.0 | Mpa |
| Tensile strain | Yield,23°C | ISO527-2 | 2.6 | % |
| Tensile modulus | ASTMD638 | 2300 | Mpa | |
| ISO527-2 | 2300 | Mpa | ||
| elongation | Break | ASTMD638 | 2.6 | % |
| Bending modulus | ASTMD790 | 2300 | Mpa | |
| bending strength | ASTMD790 | 65.0 | Mpa |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Hot deformation temperature | 0.45MPa,Unannealed | ASTMD648 | 90.6 | °C |
| 0.45MPa,Annealed | ASTMD648 | 104 | °C | |
| 1.8MPa,Unannealed | ASTMD648 | 77.8 | °C | |
| 1.8MPa,Annealed | ASTMD648 | 98.9 | °C | |
| Vicat softening temperature | -- | ISO306/A50 | 105 | °C |
| -- | ISO306/B50 | 96.0 | °C | |
| Linear coefficient of thermal expansion | MD | ISO11359-2 | 8.0E-5to1.1E-4 | cm/cm/°C |
| Hot deformation temperature 2 | 0.45MPa,Annealed | ISO75-2/B | 99.0 | °C |
| 1.8MPa,Annealed | ISO75-2/A | 94.0 | °C | |
| thermal conductivity | DIN52612 | 0.17 | W/m/K |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Dissipation factor | 100Hz | IEC60250 | 4.8E-03 | |
| 1MHz | IEC60250 | 7.9E-03 | ||
| Relative permittivity | 100Hz | IEC60250 | 2.90 | |
| 1MHz | IEC60250 | 2.80 | ||
| Surface resistivity | IEC60093 | 1E+13 | ohms | |
| Dielectric constant | 1.00mm,1MHz | ASTMD150 | 2.80 | |
| Volume resistivity | ASTMD257 | >1.0E+15 | ohms·cm | |
| IEC60093 | 1E+15 | ohms·cm |
| Impact performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Impact strength of simply supported beam without notch | -30°C | ISO179 | 100 | kJ/m² |
| 23°C | ISO179 | 180 | kJ/m² | |
| Charpy Notched Impact Strength | -30°C | ISO179 | 8.0 | kJ/m² |
| 23°C | ISO179 | 22 | kJ/m² | |
| Impact strength of cantilever beam gap | -30°C | ASTMD256 | 59 | J/m |
| -18°C | ASTMD256 | 100 | J/m | |
| 23°C | ASTMD256 | 300 | J/m | |
| -30°C | ISO180/A | 8.0 | kJ/m² | |
| 23°C | ISO180/A | 26 | kJ/m² |
| hardness | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Rockwell hardness | R-Scale | ASTMD785 | 103 | |
| Ball pressure hardness | ISO2039-1 | 97.0 | Mpa |
| optical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Huangdu Index | DIN6167 | 13 | YI |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.