POM DURACON® TF-30 CF2003 DAICEL MALAYSIA

Unit Price:
$2738 USD/MT
Packaging Specification:
25KG/PKG
Supply Quantity:
22MT
Delivery Terms:
FOB
Port of Loading:
China Main Port
Accepted Payment Methods:
T/T
Shipping:
Negotiate supplier for shipping details

Supplier Information

ASIA PLASTIC EXCHANGE LIMITED

serv********

For more detailed information including pricing, customization, and shipping, please contact supplier.

Technical Data Sheet

Physical Properties	Test Condition	Test Method	Test Result	Unit
Moisture Absorption	23°C,24hr	ISO62	0.80	%
Melt Volume flow Rate	190°C/2.16kg	ISO1133	7.00	cm3/10min
Melt Mass-Flow Rate	190°C/2.16kg	ISO1133	8.0	g/10min

Mechanical Properties	Test Condition	Test Method	Test Result	Unit
Flexural Stress		ISO178	43.0	Mpa
Nominal Tensile Strain at Break		ISO527-2	75	%
Coefficient of Friction	Dynamic2	JISK7218	0.58
Coefficient of Friction	Coefficient of Friction	Steel - Dynamic3	JISK7218	0.80
Specific Wear Rate	0.49MPa,0.30m/sec4	JISK7218	<1.0	10^-8mm³/N·m
	Specific Wear Rate	0.49MPa,0.30m/sec5	JISK7218	200	10^-8mm³/N·m
		Specific Wear Rate	0.060MPa,0.15m/sec6	JISK7218	300	10^-8mm³/N·m
		Specific Wear Rate	Specific Wear Rate	0.060MPa,0.15m/sec7	JISK7218	1500	10^-8mm³/N·m
Tensile Stress		ISO527-2	37.0	Mpa
Tensile Modulus		ISO527-2	1300	Mpa
Flexural Modulus		ISO178	1200	Mpa

Thermal Properties	Test Condition	Test Method	Test Result	Unit
Linear thermal expansion coefficient	MD：23to55°C	内部方法	1.4E-04	cm/cm/°C
Linear thermal expansion coefficient	Linear thermal expansion coefficient	TD：23to55°C	内部方法	1.4E-04	cm/cm/°C

Electrical performance	Test Condition	Test Method	Test Result	Unit
Surface Resistivity		IEC60093	5E+13	ohms
Volume Resistivity		IEC60093	3E+13	ohms·cm

hardness	Test Condition	Test Method	Test Result	Unit
Rockwell Hardness	M-Scale	ISO2039-2	45

Supplementary information	Test Condition	Test Method	Test Result	Unit
Color Number			CF2002/CF2003

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.