PC LEXAN™ EXL6013-88225 SABIC EU
50
- Unit Price:
- $3389 USD/MT
- Packaging Specification:
- 25 KG/PKG
- Supply Quantity:
- 20MT
- Delivery Terms:
- FOB
- Port of Loading:
- China Main Port
- Accepted Payment Methods:
- T/T
- Shipping:
- Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 2787 3515
serv********
For more detailed information including pricing, customization, and shipping, please contact supplier.
Material Description
Technical Data Sheet
Material Description
- Material Properties:High mobility Ductility at low temperat Short molding cycle
- Application Areas:Electronic and Electrical Aerospace Applications lens
- Color:--
- Grade:Injection grade
Technical Data Sheet
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Modeling Shrinkage | MD1 | 内部方法 | 0.60到0.80 | % |
| Moisture Absorption | Saturation,23°C | ISO62 | 0.35 | % |
| Equilibrium,23°C,50%RH | ISO62 | 0.15 | % | |
| Melt Volume flow Rate | 300°C/1.2kg | ISO1133 | 5.50 | cm3/10min |
| Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Flexural Stress | ISO178 | 80.0 | Mpa | |
| Tensile Stress | Yield | ISO527-2/50 | 55.0 | Mpa |
| Break | ISO527-2/50 | 60.0 | Mpa | |
| Tensile Strain | Yield | ISO527-2/50 | 7.0 | % |
| Break | ISO527-2/50 | 100 | % | |
| Tensile Modulus | ISO527-2/1 | 2100 | Mpa | |
| Taber Abrasion Resistance | 1000Cycles,1000g,CS-17Wheel | 内部方法 | 10.0 | mg |
| Flexural Modulus | ISO178 | 2150 | Mpa |
| Thermal Properties | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| 0.45MPa, Unannealed,100mm Span | ISO75-2/Be | 131 | °C | |
| 1.8MPa, Unannealed,100mm Span | ISO75-2/Ae | 122 | °C | |
| Linear thermal expansion coefficient | MD:23to80°C | ISO11359-2 | 7E-05 | cm/cm/°C |
| TD:23to80°C | ISO11359-2 | 7E-05 | cm/cm/°C | |
| Thermal Conductivity | ISO8302 | 0.20 | W/m/K | |
| Ball PressureTest | 125°C | IEC60695-10-2 | Pass | |
| -- | ISO306/B50 | 138 | °C | |
| ISO306/B120 | 140 | °C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Surface Resistivity | IEC60093 | >1.0E+15 | ohms | |
| Volume Resistivity | IEC60093 | >1.0E+15 | ohms·cm | |
| Relative Permittivity | 60Hz | IEC60250 | 2.70 | |
| 1MHz | IEC60250 | 2.70 | ||
| 50Hz | IEC60250 | 2.70 | ||
| Comparative Tracking Index | IEC60112 | 175 | V | |
| Dissipation Factor? | 50Hz | IEC60250 | 1E-03 | |
| 60Hz | IEC60250 | 1E-03 | ||
| 1MHz | IEC60250 | 0.010 | ||
| Dielectric Strength | 3.20mm,in Oil | IEC60243-1 | 17 | KV/mm |
| Impact Properties | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Charpy Unnotched Impact Strength | -30°C | ISO179/1eU | 无断裂 | |
| 23°C | ISO179/1eU | 无断裂 | ||
| Notched Izod Impact Strength | -30°C | ISO180/1A | 60 | kJ/m² |
| 23°C | ISO180/1A | 70 | kJ/m² | |
| Unnotched Izod Impact Strength | -30°C | ISO180/1U | 无断裂 | |
| 23°C | ISO180/1U | 无断裂 | ||
| Charpy Notched Impact Strength | -30°C | ISO179/1eA | 70 | kJ/m² |
| 23°C | ISO179/1eA | 75 | kJ/m² |
| hardness | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Ball Indentation Hardness | H358/30 | ISO2039-1 | 90.0 | Mpa |
| Flammability | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| UL flame retardant rating | 3.00mm | UL94 | V-1 | |
| Glow Wire Flammability Index | 1.00mm | IEC60695-2-12 | 850 | °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.