PC/ABS Bayblend® FR110 013693 COVESTRO THAILAND

Unit Price:
$3538 USD/MT
Packaging Specification:
25KG/PKG
Supply Quantity:
10MT
Delivery Terms:
FOB
Port of Loading:
China Main Port
Accepted Payment Methods:
T/T
Shipping:
Negotiate supplier for shipping details

Supplier Information

ASIA PLASTIC EXCHANGE LIMITED

serv********

For more detailed information including pricing, customization, and shipping, please contact supplier.

Technical Data Sheet

Physical Properties	Test Condition	Test Method	Test Result	Unit
Modeling Shrinkage	Flow ，500bar	ISO 2577	0.4-0.6	%
Modeling Shrinkage	Modeling Shrinkage	垂直Flow ，500bar	ISO 2577	0.4-0.6	%
Melt index	240℃	ISO 1133	20	CM
Spiral Flow	260℃，2×8.7mm		380	mm

Mechanical Properties	Test Condition	Test Method	Test Result	Unit
Tensile Elongation?(Break)	50mm/min	ISO 527	>50	%
Tensile Stress (Yield)	50mm/min	ISO 527	4	%
Tensile Stress (Yield)	50mm/min	ISO 527	60	Mpa
IZOD Notch Impact Strength	23℃	ISO 180-1A	50	KJ/m
IZOD Notch Impact Strength	IZOD Notch Impact Strength	-30℃	ISO 180-1A	15	KJ/m
Tensile Modulus	1mm/min	ISO 527	2600	Mpa
Tensile Strength	50mm/min	ISO 527	50	Mpa
Izod Impact Strength	23℃	ISO 180-1U	N	KJ/m

Thermal Properties	Test Condition	Test Method	Test Result	Unit
Deflection Temperature Under Load?	1.80MPa	ISO 75	90	°C
Deflection Temperature Under Load?	Deflection Temperature Under Load?	0.45MPa	ISO 75	100	°C
Vicat Softening Temperature	50N;50K/h	ISO 306	108	°C
Coefficient of Linear Thermal Expansion	Flow ，23至55℃	ASTM E 831	0.76
Coefficient of Linear Thermal Expansion	Coefficient of Linear Thermal Expansion	垂直Flow ，23至55℃	ASTM E 831	0.80

Electrical performance	Test Condition	Test Method	Test Result	Unit
Dielectric Constant	1MHZ	IEC 250	3.1
Dielectric Constant	Dielectric Constant	100HZ	IEC 250	3.2
Surface Resistivity		IEC 93	1E+14	Ω
Volume Resistivity		IEC 93	1E+15	Ω.m
Dielectric Strength		IEC 243-1	30	KV/mm
Dissipation Factor?	100HZ	IEC 250	30	0.0001
Dissipation Factor?	Dissipation Factor?	1MHZ	IEC 250	80	0.0001
Arc Resistance	溶液A	IEC 112	500	等级

Processing	Test Method	Test Result	Unit
Injection Rate	ISO 294	240	mm/s
Melt Temperature	ISO 294	240	°C
Mold Temperature	ISO 294	80	°C

Other	Test Condition	Test Method	Test Result	Unit
Hygroscopicity	23℃/50%相对湿度	ISO 62	0.2	%
Moisture Absorption	23℃Saturation吸水	ISO 62	0.5	%

Physical	Test Condition	Test Method	Test Result	Unit
Density / Specific Gravity		ISO 1183	1190	kg/m

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.