Technical Data Sheet
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Modeling Shrinkage | MD:260°C,3.00mm | ISO2577 | 0.50到0.70 | % |
| Modeling Shrinkage | TD:260°C,3.00mm | ISO2577 | 0.50到0.70 | % |
| Moisture Absorption | Saturation,23°C | ISO62 | 0.70 | % |
| Moisture Absorption | Equilibrium,23°C,50%RH | ISO62 | 0.20 | % |
| Melt Volume flow Rate | 260°C/5.0kg | ISO1133 | 18.0 | cm3/10min |
| Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile Stress | Yield,23°C | ISO527-2/50 | 54.0 | Mpa |
| Tensile Stress | Break,23°C | ISO527-2/50 | 47.0 | Mpa |
| Tensile Strain | Yield,23°C | ISO527-2/50 | 4.4 | % |
| Tensile Strain | Break,23°C | ISO527-2/50 | >50 | % |
| Tensile Modulus | 23°C | ISO527-2/1 | 2400 | Mpa |
| Thermal Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Linear thermal expansion coefficient | MD:23to55°C | ISO11359-2 | 8E-05 | cm/cm/°C |
| Linear thermal expansion coefficient | TD:23to55°C | ISO11359-2 | 8.5E-05 | cm/cm/°C |
| 0.45MPa, Unannealed | | ISO75-2/B | 122 | °C |
| 1.8MPa, Unannealed | | ISO75-2/A | 102 | °C |
| -- | | ISO306/B50 | 118 | °C |
| -- | | ISO306/B120 | 120 | °C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Dielectric Strength | 23°C,1.00mm | IEC60243-1 | 35 | KV/mm |
| Surface Resistivity | | IEC60093 | 1E+16 | ohms |
| Volume Resistivity | 23°C | IEC60093 | 1E+16 | ohms·cm |
| Relative Permittivity | 23°C,100Hz | IEC60250 | 3.10 | |
| Relative Permittivity | 23°C,1MHz | IEC60250 | 3.00 | |
| Comparative Tracking Index | SolutionA | IEC60112 | 250 | V |
| Dissipation Factor? | 23°C,100Hz | IEC60250 | 3E-03 | |
| Dissipation Factor? | 23°C,1MHz | IEC60250 | 8.5E-03 | |
| Fill Analysis | Test Condition | Test Method | Test Result | Unit |
|---|
| Melt Viscosity | 260°C | ISO11443-A | 200 | Pa·s |
| Impact Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Notched Izod impact strength | -30°C | ISO180 | 无断裂 | |
| Notched Izod impact strength | 23°C | ISO180 | 无断裂 | |
| Flammability | Test Condition | Test Method | Test Result | Unit |
|---|
| UL flame retardant rating | 0.850mm | UL94 | HB | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
