Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Melt Mass-Flow Rate | 260°C/2.16kg | ASTMD1238 | 19 | g/10min |
Modeling Shrinkage | MD:3.20mm | 内部方法 | 0.40到0.60 | % |
Moisture Absorption | Saturation,23°C | ISO62 | 0.15 | % |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Elongation | Yield | ASTMD638 | 4.0 | % |
Tensile Elongation | Break | ASTMD638 | 60 | % |
Flexural Modulus | 50.0mmSpan | ASTMD790 | 2350 | Mpa |
Tensile Strength | Yield | ASTMD638 | 58.0 | Mpa |
Tensile Strength | Break | ASTMD638 | 53.0 | Mpa |
Tensile Strength | Yield | ASTMD638 | 58.0 | Mpa |
Tensile Strength | Break | ASTMD638 | 53.0 | Mpa |
Tensile Elongation | Yield | ASTMD638 | 4.0 | % |
Tensile Elongation | Break | ASTMD638 | 60 | % |
Flexural Modulus | 50.0mmSpan | ASTMD790 | 2350 | Mpa |
Tensile Modulus | | ASTMD638 | 2400 | Mpa |
Flexural Strength | Yield,50.0mmSpan | ASTMD790 | 100 | Mpa |
Tensile Modulus | | ASTMD638 | 2400 | Mpa |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Deflection Temperature Under Load? | 0.45MPa,Unannealed,6.40mm | ASTMD648 | 101 | °C |
Deflection Temperature Under Load? | 1.8MPa,Unannealed,3.20mm | ASTMD648 | 86.0 | °C |
Vicat Softening Temperature | | ASTMD15257 | 104 | °C |
Linear thermal expansion coefficient | MD:-40to40°C | ASTME831 | 7.5E-05 | cm/cm/°C |
Linear thermal expansion coefficient | TD:-40to40°C | ASTME831 | 7.5E-05 | cm/cm/°C |
Impact Properties | Test Condition | Test Method | Test Result | Unit |
---|
23°C | | ASTMD256 | 690 | J/m |
Instrumented Dart Impact | 23°C,TotalEnergy | ASTMD3763 | 57.0 | J |
-30°C | | ASTMD256 | 130 | J/m |
23°C6 | | ISO180/1A | 50 | kJ/m² |
Flammability | Test Condition | Test Method | Test Result | Unit |
---|
UL flame retardant rating | 0.400mm,TestingbySABIC | UL94 | V-2 | |
UL flame retardant rating | 0.600mm,TestingbySABIC | UL94 | V-1 | |
UL flame retardant rating | 0.750mm,TestingbySABIC | UL94 | V-0 | |
UL flame retardant rating | 0.40mm,TestingbySABIC | UL94 | V-2 | |
UL flame retardant rating | 0.60mm,TestingbySABIC | UL94 | V-1 | |
UL flame retardant rating | 0.75mm,TestingbySABIC | UL94 | V-0 | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.