PC/ABS CYCOLOY™ CM6140 WH SABIC INNOVATIVE NANSHA

Unit Price:
$3578 USD/MT
Packaging Specification:
25KG/PKG
Supply Quantity:
10MT
Delivery Terms:
FOB
Port of Loading:
China Main Port
Accepted Payment Methods:
T/T
Shipping:
Negotiate supplier for shipping details

Supplier Information

ASIA PLASTIC EXCHANGE LIMITED

serv********

For more detailed information including pricing, customization, and shipping, please contact supplier.

Technical Data Sheet

Physical Properties	Test Condition	Test Method	Test Result	Unit
Modeling Shrinkage	Flow : 3.20 mm	内部方法	0.30 到 0.50	%
Modeling Shrinkage	Modeling Shrinkage	Across Flow : 3.20 mm	内部方法	0.40 到 0.60	%
Moisture Absorption	24 hr	ASTM D570	0.10	%
	Moisture Absorption	24 hr, 50% RH	ASTM D570	0.010	%
		Moisture Absorption	Saturation, 23°C	ISO 62	0.090	%
		Moisture Absorption	Moisture Absorption	Equilibrium, 23°C, 50% RH	ISO 62	0.010	%
Melt Mass-Flow Rate	260°C/2.16 kg	ASTM D1238	18	g/10 min
Melt Volume flow Rate	220°C/5.0 kg	ISO 1133	14.0	cm3/10min

Mechanical Properties	Test Condition	Test Method	Test Result	Unit
Flexural Stress	-- 6, 7	ISO 178	97.0	Mpa
Flexural Stress	Flexural Stress	Yield, 50.0 mm Span 5	ASTM D790	100	Mpa
Tensile Modulus	-- 2	ASTM D638	3500	Mpa
Tensile Modulus	Tensile Modulus	--	ISO 527-2/1	3200	Mpa
Tensile Elongation	Yield 4	ASTM D638	4.0	%
	Tensile Elongation	Yield	ISO 527-2/5	3.5	%
		Tensile Elongation	Break 4	ASTM D638	100	%
		Tensile Elongation	Tensile Elongation	Break	ISO 527-2/50	15	%
Flexural Modulus	50.0 mm Span 5	ASTM D790	3300	Mpa
Flexural Modulus	Flexural Modulus	-- 6	ISO 178	3450	Mpa
Tensile Strength	Yield 3	ASTM D638	65.0	Mpa
	Tensile Strength	Yield 4	ASTM D638	65.0	Mpa
		Tensile Strength	Break 4	ASTM D638	50.0	Mpa
		Tensile Strength	Tensile Strength	Break	ISO 527-2/5	50.0	Mpa

Thermal Properties	Test Condition	Test Method	Test Result	Unit
Vicat Softening Temperature	--	ASTM D152511	91.0	°C
	Vicat Softening Temperature	--	ISO 306/B50	98.0	°C
	Vicat Softening Temperature	Vicat Softening Temperature	--	ISO 306/B120	102	°C
Linear thermal expansion coefficient	Flow : -40 to 40°C	ASTM E831, ISO 11359-2	5.5E-5	cm/cm/°C
	Linear thermal expansion coefficient	Across Flow : -40 to 40°C	ASTM E831	6.0E-5	cm/cm/°C
	Linear thermal expansion coefficient	Linear thermal expansion coefficient	Across Flow : -40°C	ISO 11359-2	6.0E-5	cm/cm/°C
Deflection Temperature Under Load?	0.45 MPa, Unannealed, 6.40 mm	ASTM D648	97.0	°C
	Deflection Temperature Under Load?	1.8 MPa, Unannealed, 3.20 mm	ASTM D648	83.0	°C
		Deflection Temperature Under Load?	1.8 MPa, Unannealed, 6.40 mm	ASTM D648	89.0	°C
		Deflection Temperature Under Load?	Deflection Temperature Under Load?	1.8 MPa, Unannealed, 4.00 mm, 64.0 mm Span 10	ISO 75-2/Af	80.0	°C
Ball PressureTest	73 to 77°C	IEC 60695-10-2	通过

Electrical performance	Test Condition	Test Method	Test Result	Unit
Surface Resistivity		ASTM D257	3.5E+15	ohms
Volume Resistivity		ASTM D257	2.7E+16	ohms·cm

Injection	Test Result	Unit
Drying Time	> 4.0	hr
Rear Temperature	275 到 300	°C
Middle Temperature	275 到 300	°C
Front Temperature	280 到 300	°C
Nozzle Temperature	280 到 300	°C
Drying Temperature	90	°C
Suggested Max Moisture	0.040	%
Processing (Melt) Temp	275 到 300	°C
Mold Temperature	60 到 80	°C

Impact Properties	Test Condition	Test Method	Test Result	Unit
Charpy Notched Impact Strength	-30°C	ISO 179/1eA	5.0	kJ/m²
Charpy Notched Impact Strength	Charpy Notched Impact Strength	23°C	ISO 179/1eA	10	kJ/m²
Instrumented Dart Impact	23°C, Total Energy	ASTM D3763	50.0	J

Flammability	Test Condition	Test Method	Test Result	Unit
Glow Wire Flammability Index	0.8 mm	IEC 60695-2-12	960	°C
Glow Wire Ignition Temperature	1.0 mm	IEC 60695-2-13	850	°C
Glow Wire Ignition Temperature	Glow Wire Ignition Temperature	3.0 mm	IEC 60695-2-13	800	°C
Flame Rating	0.60 mm	UL 94	V-1
	Flame Rating	0.8 mm	UL 94	V-0
	Flame Rating	Flame Rating	1.5 mm	UL 94	5VB

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.