Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Melt Mass-Flow Rate | 230°C/2.16kg | ISO1133 | 11 | g/10min |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Coefficient of Friction | | DIN53375 | 0.18 | |
Tensile Modulus | | ISO527-2/1 | 1500 | Mpa |
Flexural Modulus | 流量:0.0500mm,铸造薄膜 | DIN53121 | 700 | Mpa |
Flexural Modulus | Across Flow:0.0500mm,铸造薄膜 | DIN53121 | 670 | Mpa |
Tensile Stress | Yield | ISO527-2/50 | 35.0 | Mpa |
Tensile Strain | Yield | ISO527-2/50 | 9.0 | % |
Tensile Strain | Break | ISO527-2/50 | >50 | % |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Deflection Temperature Under Load? | 0.45MPa,Unannealed | ISO75-2/B | 85.0 | °C |
Vicat Softening Temperature | | ISO306/A50 | 154 | °C |
Melting temperature (DSC) | | ISO3146 | 163 | °C |
Film | Test Condition | Test Method | Test Result | Unit |
---|
Film Thickness - Tested) | | | 50 | µm |
Tensile Elongation | MD:Break,50μm,铸造薄膜 | DIN53455 | 680 | % |
Tensile Elongation | TD:Break,50μm,铸造薄膜 | DIN53455 | 720 | % |
Gardner Impact | 50µm,铸造薄膜 | ASTMD1709 | 280 | g |
hardness | Test Condition | Test Method | Test Result | Unit |
---|
Ball Indentation Hardness | H358/30 | ISO2039-1 | 76.0 | Mpa |
optical performance | Test Condition | Test Method | Test Result | Unit |
---|
Gloss | 20°,50.0µm,铸造薄膜 | ISO2813 | 100 | |
Haze | 1000μm,Injection | ASTMD1003 | 2.7 | % |
Supplementary information | Test Condition | Test Method | Test Result | Unit |
---|
Tearing Strength | MD:50.0µm | DIN53455 | 42.0 | Mpa |
Tearing Strength | TD:50.0µm | DIN53455 | 38.0 | Mpa |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.