Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Haze | | | 优等|≤2.5 | % |
Haze | | | 一等|- | % |
Haze | | | 合格|- | % |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Flexural Modulus | | | 优等|1.323 | GPa |
Flexural Modulus | | | 一等|- | GPa |
Flexural Modulus | | | 合格|- | GPa |
Rockwell Hardness | | | 优等|93 | R |
Rockwell Hardness | | | 一等|- | R |
Rockwell Hardness | | | 合格|- | R |
Unnotched Izod Impact Strength | 23℃ | | 优等|≥28.4 | J/m |
Unnotched Izod Impact Strength | 23℃ | | 一等|- | J/m |
Unnotched Izod Impact Strength | 23℃ | | 合格|- | J/m |
Tensile Strength(Yield) | | | 优等|32.3 | Mpa |
Tensile Strength(Yield) | | | 一等|30.4 | Mpa |
Tensile Strength(Yield) | | | 合格|29.4 | Mpa |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Deflection Temperature Under Load? | | | 优等|87 | °C |
Deflection Temperature Under Load? | | | 一等|- | °C |
Deflection Temperature Under Load? | | | 合格|- | °C |
Vicat Softening Temperature | | | 优等|154 | °C |
Vicat Softening Temperature | | | 一等|- | °C |
Vicat Softening Temperature | | | 合格|- | °C |
Other | Test Condition | Test Method | Test Result | Unit |
---|
isotactic index | | | 优等|≥94.5 | % |
isotactic index | | | 一等|≥94.5 | % |
isotactic index | | | 合格|≥94.5 | % |
Titanium Content | | | 优等|≤4 | ppm |
Titanium Content | | | 一等|- | ppm |
Titanium Content | | | 合格|- | ppm |
Ash Content | | | 优等|≤130 | ppm |
Ash Content | | | 一等|≤300 | ppm |
Ash Content | | | 合格|≤400 | ppm |
Fish Eye | 1.5-2.5 | | 一等|≤0 | pa |
Fish Eye | 1.5-2.5 | | 合格|≤10 | pa |
Fish Eye | 0.7-1.5 | | 优等|≤50 | pa |
Fish Eye | 0.7-1.5 | | 一等|≤50 | pa |
Fish Eye | 0.7-1.5 | | 合格|≤30 | pa |
Fish Eye | 0.2-0.7 | | 优等|≤300 | pa |
Fish Eye | 0.2-0.7 | | 一等|≤300 | pa |
Fish Eye | 0.2-0.7 | | 合格|≤500 | pa |
Fish Eye | ≥2.5 | | 优等|≤0 | pa |
Fish Eye | ≥2.5 | | 一等|≤0 | pa |
Fish Eye | ≥2.5 | | 合格|≤5 | pa |
Fish Eye | 1.5-2.5 | | 优等|≤0 | pa |
Yellow index | | | 优等|≤4 | ppm |
Yellow index | | | 一等|- | ppm |
Yellow index | | | 合格|- | ppm |
chlorine content | | | 优等|≤50 | ppm |
chlorine content | | | 一等|- | ppm |
chlorine content | | | 合格|- | ppm |
Physical | Test Condition | Test Method | Test Result | Unit |
---|
Melt Mass-Flow Rate | | | 优等|8.5-10.5 | g/10min |
Melt Mass-Flow Rate | | | 一等|7.5-11.5 | g/10min |
Melt Mass-Flow Rate | | | 合格|6.0-13.0 | g/10min |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.