Technical Data Sheet
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Melt Mass-Flow Rate | 190°C/2.16kg | ASTMD1238 | 5.0 | g/10min |
| Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile Elongation | Break,Compression Molded | ASTMD638 | 1200 | % |
| Tensile Strength | Break,Compression Molded | ASTMD638 | 4.98 | Mpa |
| Tensile Modulus (100% Secant) | Compression Molded | ASTMD638 | 2.28 | Mpa |
| Thermal Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| TMA3 | 2.54cm | 内部方法 | 97 | °C |
| Melting temperature (DSC) | | 内部方法 | 122 | °C |
| Elastomers Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile Strength | Break | ASTMD412 | 9.50 | Mpa |
| Tensile Elongation | Break | ASTMD412 | 1600 | % |
| Compression Set | 21°C | ASTMD395 | 22 | % |
| Compression Set | 70°C2 | ASTMD395 | 55 | % |
| hardness | Test Condition | Test Method | Test Result | Unit |
|---|
| Shore Hardness | Shore A,Compression Molded | ASTMD2240 | 69 | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
