Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Melt Mass-Flow Rate | 190°C/2.16kg | ASTMD1238 | 4.0 | g/10min |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Strength(Break) | TD | ASTM D-882 | 32 | Mpa |
Tensile Strength(Break) | MD | ASTM D-882 | 33 | Mpa |
Tensile Strength(Yield) | TD | ASTM D-882 | 5 | Mpa |
Tensile Strength(Yield) | MD | ASTM D-882 | 7 | Mpa |
Tensile Elongation?(Break) | TD | ASTM D-882 | 714 | % |
Tensile Elongation?(Break) | MD | ASTM D-882 | 664 | % |
Tensile Modulus (2% Secant) | TD | ASTM D-882 | 63 | Mpa |
Film Puncture Force | | 陶氏企业测试 | 17 | J/cm³ |
Tensile Modulus (3% Secant) | MD | ASTM D-882 | 63 | Mpa |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Melting temperature (DSC) | | 内部方法 | 124 | °C |
Vicat Softening Temperature | | ASTM D-1525 | 71 | °C |
Vicat Softening Temperature | | ASTMD1525 | 71.1 | °C |
Film | Test Condition | Test Method | Test Result | Unit |
---|
Carbon Dioxide Transmission Rate | 23°C,50.8µm | 内部方法 | 2000 | cm³·mm/m²/atm/24hr |
Oxygen Transmission Rate | 23°C,51µm | ASTMD3985 | 450 | cm³·mm/m²/atm/24hr |
Water Vapor Transmission Rate | 51µm | ASTMF1249 | 0.85 | g·mm/m²/atm/24hr |
Secant Modulus | 2%Secant,MD:20μm | ASTMD882 | 58.8 | Mpa |
Secant Modulus | 2%Secant,MD:51μm | ASTMD882 | 62.6 | Mpa |
Secant Modulus | 2%Secant,TD:20μm | ASTMD882 | 64.7 | Mpa |
Secant Modulus | 2%Secant,TD:51μm | ASTMD882 | 63.0 | Mpa |
Tensile Elongation | MD:Break,20μm | ASTMD882 | 500 | % |
Tensile Elongation | MD:Break,51μm | ASTMD882 | 660 | % |
Tensile Elongation | TD:Break,20μm | ASTMD882 | 710 | % |
Tensile Elongation | TD:Break,51μm | ASTMD882 | 710 | % |
Elmendorf Tear Strength | MD:20µm | ASTMD1922 | 330 | g |
Elmendorf Tear Strength | MD:51µm | ASTMD1922 | 960 | g |
Elmendorf Tear Strength | TD:20µm | ASTMD1922 | 500 | g |
Elmendorf Tear Strength | TD:51µm | ASTMD1922 | 1100 | g |
Tensile Strength | MD:Yield,20μm | ASTMD882 | 7.00 | Mpa |
Tensile Strength | MD:Yield,51μm | ASTMD882 | 6.76 | Mpa |
Tensile Strength | TD:Yield,20μm | ASTMD882 | 4.92 | Mpa |
Tensile Strength | TD:Yield,51μm | ASTMD882 | 6.34 | Mpa |
Tensile Strength | MD:Break,20μm | ASTMD882 | 36.9 | Mpa |
Tensile Strength | MD:Break,51μm | ASTMD882 | 32.6 | Mpa |
Tensile Strength | TD:Break,20μm | ASTMD882 | 29.1 | Mpa |
Tensile Strength | TD:Break,51μm | ASTMD882 | 32.4 | Mpa |
Gardner Impact | 20µm | ASTMD1709B | >850 | g |
Gardner Impact | 51µm | ASTMD1709B | >850 | g |
Film Puncture Force | 20µm | 内部方法 | 18.9 | J/cm³ |
Film Puncture Force | 51µm | 内部方法 | 17.5 | J/cm³ |
optical performance | Test Condition | Test Method | Test Result | Unit |
---|
Haze | | ASTM D-1003 | 1.8 | % |
Haze | 20.3µm | ASTMD1003 | 0.60 | % |
Haze | 50.8µm | ASTMD1003 | 1.8 | % |
Gloss | 45° | ASTM D-2457 | 90 | |
Gloss | 45°,20.3µm | ASTMD2457 | 92 | |
Gloss | 45°,50.8µm | ASTMD2457 | 90 | |
Transmittance | | ASTM D-1746 | 99 | |
Transmittance | 20.3µm | ASTMD1746 | 99.0 | |
Transmittance | 50.8µm | ASTMD1746 | 99.0 | |
Physical | Test Condition | Test Method | Test Result | Unit |
---|
Density | | ASTM D792 | 0.904 | g/cm³ |
Melt Mass-Flow Rate | | ASTM D1238 | 4 | g/10min |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.