Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Melt Mass-Flow Rate | | ASTM D1238/ISO 1133 | 0.4 | g/10min |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Elongation?(Break) | | ASTM D638/ISO 527 | 200 | kg/cm²(MPa)[Lb/in²] |
Rockwell Hardness | | ASTM D785 | 90 | |
Bending elasticity | | ASTM D-790 | 11500 | kg/cm |
Tensile Elongation | | ASTM D-638 | 500 | % |
tensile strength | Yield点 | ASTM D-638 | 270 | kg/cm |
tensile strength | 断点 | ASTM D-638 | 240 | kg/cm |
Charpy impact strength | | ASTM D256/ISO 179 | 12 | kg·cm/cm(J/M)ft·lb/in |
Izod Impact Strength | 0℃ | ASTM D-256 | 10 | kg.cm/cm |
Izod Impact Strength | 23℃ | ASTM D-256 | 无破损 | kg.cm/cm |
Izod Impact Strength | -20℃ | ASTM D-256 | 6 | kg.cm/cm |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Melting Temperature | | HS Method | 162 | °C |
Vicat Softening Temperature | | ASTM D-1525 | 150 | °C |
Coefficient of Linear Thermal Expansion | 0℃-110℃ | Dilatometor | 1.5×10 | K |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|
Surface Resistivity | | HS Method | >10 | Ω |
Physical | Test Condition | Test Method | Test Result | Unit |
---|
Melt index | 230℃,2.16Kg | ASTM D-1238 | 0.4 | g/10min |
Density | | ASTM D-792 | 0.91 | g/cm |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.