Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Melt Mass-Flow Rate | 190°C/21.6kg | ASTMD1238 | 1.4 | g/10min |
Melt Mass-Flow Rate | 190°C/2.16kg | ISO1133 | 1.3 | g/10min |
Solid Content | | ISO1628-3 | 6.0 | dl/g |
Viscosity number | | ISO307 | 600 | cm³/g |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Abrasion Loss | | 内部方法 | 250 | |
Nominal Tensile Strain at Break | | ISO527-2/1A/50 | >50 | % |
WearbySandslurryMethod3 | | 内部方法 | 310 | |
Tensile Creep Modulus | 1hr | ISO899-1 | 680 | Mpa |
Tensile Creep Modulus | 1000hr | ISO899-1 | 340 | Mpa |
Tensile Stress | Yield | ISO527-2/1A/50 | 26.0 | Mpa |
Tensile Strain | Yield | ISO527-2/1A/50 | 9.0 | % |
Tensile Modulus | | ISO527-2/1A/1 | 1100 | Mpa |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Deflection Temperature Under Load? | 0.45MPa,Unannealed | ISO75-2/B | 75.0 | °C |
Deflection Temperature Under Load? | 1.8MPa,Unannealed | ISO75-2/A | 41.0 | °C |
Linear thermal expansion coefficient | MD | ASTMD696,ISO11359-2 | 2E-04 | cm/cm/°C |
Vicat Softening Temperature | | ASTMD1525,ISO306/B50 | 80.0 | °C |
Specific Heat | 23°C | 内部方法 | 1840 | J/kg/°C |
Thermal Conductivity | 23°C | 内部方法 | 0.41 | W/m/K |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|
Dielectric Strength | | IEC60243-1 | 40 | KV/mm |
Comparative Tracking Index | | IEC60112 | 600 | V |
Dissipation Factor? | 100Hz | IEC60250 | 2E-04 | |
Dissipation Factor? | 1MHz | IEC60250 | 4E-04 | |
Surface Resistivity | -- | ASTMD257 | >1.0E+13 | ohms |
Surface Resistivity | -- | IEC60093 | >1.0E+12 | ohms |
Dielectric Constant | 1MHz | ASTMD150 | 2.90 | |
Dielectric Constant | 100Hz | IEC60250 | 2.00 | |
Dielectric Constant | 1MHz | IEC60250 | 2.00 | |
Volume Resistivity | -- | ASTMD257 | >1.0E+15 | ohms·cm |
Volume Resistivity | -- | IEC60093 | >1.0E+14 | ohms·cm |
Impact Properties | Test Condition | Test Method | Test Result | Unit |
---|
Charpy Notched Impact Strength | | ISO1152-2 | 25.0 | kJ/m² |
hardness | Test Condition | Test Method | Test Result | Unit |
---|
Shore Hardness | Shore D | ASTMD2240 | 63 | |
Shore Hardness | Shore D,15sec | ISO868 | 63 | |
Flammability | Test Condition | Test Method | Test Result | Unit |
---|
UL flame retardant rating | 1.6mm | UL94 | HB | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.