Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Moisture Absorption | Saturation,23℃ Saturation, 73°F | ISO 62 | 0.03 | % |
Moisture Absorption | Equilibrium,23℃,50% RH Equilibrium, 73°F, 50% RH | ISO 62 | 0.015 | % |
Melt Volume flow Rate | 230℃,5 kg 230℃/5.0 kg | ISO 1133 | 1.1 | cm3/10min |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Strain | Yield Yield | ISO 527-2 | 11 | % |
Tensile Strength | Yield Yield | ISO 527-2 | 40 | Mpa |
Tensile Creep Modulus | 1 hr 1 hr | ISO 899-1 | 508 | Mpa |
Tensile Creep Modulus | 1000 hr 1000 hr | ISO 899-1 | 210 | Mpa |
Tensile Modulus | | ISO 527-2 | 1300 | Mpa |
Nominal Tensile Strain at Break | | ISO 527-2 | > 50 | % |
可燃性等级 | Test Condition | Test Method | Test Result | Unit |
---|
1.5 mm | | IEC 60695-11-10, -20 | V-0 V-0 | |
Oxygen Index | | ISO 4589-2 | 43 | % |
Electrical | Test Condition | Test Method | Test Result | Unit |
---|
Dissipation Factor | 100 Hz 100 Hz | IEC 60250 | 0.038 | |
Dissipation Factor | 1 MHz 1 MHz | IEC 60250 | 0.23 | |
Volume Resistivity | | IEC 60093 | 200000000000000 | ohms·cm |
Relative Permittivity | 100 Hz 100 Hz | IEC 60250 | 10.5 | |
Relative Permittivity | 1 MHz 1 MHz | IEC 60250 | 6.5 | |
Surface Resistivity | | IEC 60093 | 10000000000000 | ohms |
Comparative Tracking Index | | IEC 60112 | 600 | V |
Dielectric Strength | | IEC 60243-1 | 21 | KV/mm |
Thermal | Test Condition | Test Method | Test Result | Unit |
---|
Heat Deflection Temperature | 0.45 MPa,Unannealed 66 psi, Unannealed | ISO 75-2/B | 114 | °C |
Heat Deflection Temperature | 1.8 MPa,Unannealed 264 psi, Unannealed | ISO 75-2/A | 46 | °C |
Glass Transition Temperature | | ISO 11357-2 | -43 | °C |
Peak Melting Temperature | | ISO 11357-3 | 158 | °C |
Coefficient of Linear Thermal Expansion | MD MD | ISO 11359-2 | 0.00016 | 1/℃ |
Vicat Softening Temperature | B50 B50 | ISO 306 | 107 | °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.